Bedienungsanleitung Elektra Beckum Mig Mag 232EP (Seite 12 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

753497

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

1. Please Read First!.....................12

2. Safety .........................................12

2.1 Specified conditions of use .........12

3. Operating Elements ..................13

3.1 Powerbox

(welding power source)...............13

3.2 SDV (separate wire feed unit).....13

3.3 SWK

(separate watercooling unit)........13

3.4 Control unit..................................13

3.5 Control unit for default

machine settings .........................14

4. Installation .................................14

5. Transport ...................................14

5.1 Crane hoisting.............................14

6. Preparing for Operation............14

6.1 Manual arc welding .....................14

6.2 Gas-shielded arc welding............14

6.3 Threading the electrode

wire in..........................................15

6.4 Connect the gas cylinder.............16

7. Default Machine Settings .........16

7.1 Control unit for default

machine settings .........................16

7.2 Charateristics curves...................16

7.3 Gas type......................................16

7.4 Pulsed MIG/MAG ........................16

7.5 MIG/MAG ....................................16

7.6 Manual arc welding .....................16

7.7 FBZ Burnback time .....................16

8. Operation ...................................17

8.1 Control unit..................................17

8.2 Gas-shielded arc welding............17

8.3 Manual arc welding .....................17

8.4 Shutting down .............................17

9. Maintenance ..............................17

10. Available Accessories..............17

11. Repairs.......................................18

12. Environmental Protection ........18

13. Troubles.....................................18

13.1 Error messages...........................18

13.2 General faults..............................18

14. Technical Specifications ..........19

15. Available Accessories..............59

•Read these instructions before use.

Pay special attention to the safety

information.

•If you notice transport damage while

unpacking, notify your supplier

immediately. Do not operate the

machine!

•Dispose of the packing in an envi-

ronmentally friendly manner. Take

to a proper collecting point.

•Keep these instructions for refer-

ence on any issues you may be

uncertain about.

•If you lend or sell this machine be

sure to have the instructions go with

it.

All legal regulations pertaining to the

operation of electric arc welding

machines must be observed.

The following information should be

observed as well for a safe and risk-free

handling of the welding machine!

Danger! Electric potential!

−Use the machine indoors and in dry

environment only.

−Connect the machine only to an

properly earthed out.

If in doubt check with a qualified

electrician!

Danger! Electric potential!

Service and repairs to the machines

must only be made by qualified electri-

cians.

Unplug before removing the machine’s

cover.

Danger!

Wear sufficient protective clothing when

welding.

Always use a welding visor and welder’s

gloves to protect against flying sparks

and arc radiation.

Danger!

All metal fumes are detrimental to

health!

When working indoors ensure sufficient

ventilation and extraction in order to not

exceed the max. permissible workplace

pollutant concentration.

Fumes of lead, cadmium, copper, zinc

and beryllium are especially harmful!

Caution!

Never weld earthed metal.

Welding earthed metal may cause possi-

ble damage to the protective earth con-

ductors by stray currents.

Caution!

Always attach the earth cable directly to

the weld metal and as close as possible

to the welding spot.

Caution!

Special care is required when working

near computers, electronically controlled

equipment or in the proximity of mag-

netic data media (sound recording

tapes, floppy disks, data recording

tapes, credit cards, etc.).

The arc start can cause misfunction of

this type of equipment or data loss.

2.1 Specified conditions of

use

The following components

−Powerbox (welding power source)

−SDV (separate wire feed unit)

−SWK (separate watercooling unit,

optional available for models 232/

302 EP at extra cost)

together constitute are complete welding

machine for professional and industrial

use.

Note:

The componenents, connected to

each other and ready to run are referred

to as "welding machine" in these instruc-

tions.

Their most important features:

−Secondary-switched inverter for

gas-shielded arc welding

−Integrated manual arc welding mode

−Gas-shielded arc welding with pre-

programmed charateristics curves

−Integrated charateristics curve for

MIG brazing

−4-roller drive with tachometer-con-

trolled motor for precise and reliable

wire feed

−Integrated softstart for operating

modes MIG/MAG and pulsed MIG/

MAG

−Water cooling for high shielding gas

welding power.

This welding machine is intended for

welding FE-metals, alloyed steels, non-

ferrous heavy metals and aluminium.

It conforms to all relevant regulations at

the time of delivery.

This welding machine is intended for

operation by professional arc weldors or

specialists with similar qualification.

Permissible welding processes:

−MIG and pulsed MIG (Metal-Inert-

Gas),

for aluminium and aluminium alloys

−MAG and pulsed MAG (Metal-

Active-Gas)

for steel or stainless steel

−Manual arc welding

for steel

−MIG brazing

for electro-galvanized steel plates.

For TIG welding it must be ensured that

the shielding gas cover is not blown

away by air draft.

Table of Contents

1. Please Read First!

2. Safety

Xs0014e.fm Operating Instruction ENGLISH

Elektra Beckum Mig Mag 232EP Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info