13
FORMS OF MESSAGES SENT
Info
Off
Temp xx
Call
Information on the heating system status.
Heating system switched off (temporarily in the AUTO mode; permanently in the
MAN mode). To cancel the function, use the Temperature xx message.
Required temperature change (only whole numbers can be entered, within the
permitted range of maximum and minimum temperatures).
Back call
xx = temperature value in °C (always a two-digit number, e.g. 05)
Any type of mobile phone can be used for sending and receiving messages!
If you can set the font size (format) in your phone, always use the MEDIUM size when writing messages (if
there are three options), or the BIG size (if there are two options).
!
Set: xx.x
Act: xx.x
On
Sig: x
Temperature required (user set)
Current room temperature
Heating system on
Signal strength at the site where the module is located; where x is the value
within the range 0 to 5:
0 … not determined or no signal detected
1 … the weakest signal
5 … the strongest signal
FORMS OF BACK MESSAGES FROM THE CENTRAL UNIT
Off
Heating system off
AUTO
Thermostat in automatic AUTO mode
MANU
Thermostat in manual MANU mode
Battery!
Low battery indicated in the thermostat
Noakcept!
Error indicated (bad SMS entered, etc.)
xx.x = temperature value in °C
Note:
If the minimum / maximum room temperature (preset constants 1 and 2, see BPT37 manual,
page 8) is exceeded, the “WARNING” SMS is automatically sent in the Info form.
Info: If using a credit phone card, you must make a paid call once in 3 months. This call is executed au-
tomatically (in 80 days, between 4 and 9 PM) to the phone number entered in the thermostat (CONST
12); after 20 s, the call is terminated automatically.
You can execute this function earlier by means of the “Call” SMS message.
THE BACK MESSAGES ARE SENT WITHIN 3 MINUTES!
