Bedienungsanleitung Elite Drivo II (Seite 44 von 127) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782459

Zoom out

Zoom in

Vorherige Seite

1/127

Nächste Seite

04_POWER RANGE

The power range covered by the roller is very wide and

depends on the speed. The faster you pedal, the wider

the power range. Nevertheless there may be extreme

conditions where the required power is outside of the

range (too high or too low).

In these cases the roller delivers the maximum/minimum

possible, and resumes working correctly as soon as the

conditions return to being compatible with the power

deliverable by the Drivo II. When the required power is

outside the available power range, the roller displays on

the monitor the actual power it is producing and not the

theoretical power.

05_SLOPE

The maximum simulatable slope on the Drivo II is a function

of speed and the weight of the individual rider. In fact, the

power required to pedal up a slope is function of the speed

(faster= more power) and of the weight (the heavier the

rider, the more power is required to climb any given slope).

Drivo II uses a magnetic braking system that acts directly

on a moving metallic disc to gradually and uniformly

adjust resistance. This technology allows for very accurate

changes in slope, even when small, by taking into account

the inertia experienced when riding on the road. Both

increases and decreases in resistance adjustment are

thereby gradual. This system also ensures that pedals will

not lock-up, which could have occured at exceedingly high

power outputs.

06_POWER MEASUREMENT

Drivo II features an integrated power measurement system.

This patented system measures with great accuracy the

power developed by the cyclist during training.

Measured power accuracy: ± 0,5%.

Please visit www.elite-it.com for more info.

07_DATA TRANSMISSION PROTOCOLS

Drivo II uses two different transmission protocols to interact

and send data to software / app / device.

Please contact the app / software / device manufacturer

to verify compatibility with one or more of these protocols.

ANT+

ANT+ FE-C: this protocol allows the software / app /

device to receive training data and adjust hometrainer

resistance. This protocol permits total interaction with the

hometrainer.

ANT+ Speed&Cadence*: this protocol transmits

hometrainer speed and cadence data. Although more

common than the ANT+ FE-C, it does not allow interaction

and the app/software/device.

ANT+ Power: this protocol transmits the cyclist’s power

output data. Also much more common than the ANT+ FE-

C, but this protocol does not allow interaction between the

hometrainer and the app/software/device.

With the exception of smartphones that feature integrated

ANT+ connectivity, a USB dongle is necessary to connect

via the ANT+ protocol. If iOS devices are used, a specific

dongle is needed (not included).

A complete list of ANT+ compatible devices is available at:

http://www.thisisant.com/directory/

BLUETOOTH SMART

Fitness Machine - Indoor Bike service (FTMS). This

protocol sends training data to compatible software / app /

device and adjusts resistance on the hometrainer.

This protocol offers total interaction with the hometrainer.

Speed&Cadence Service*: this protocol transmits

hometrainer speed and cadence data, but does not allow

interaction between software / app / device and the

hometrainer.

Power Service: this protocol transmits the cyclist’s power

output data, but will it also not allow interaction between

software / app / device and the hometrainer.

In most cases, smartphones and tablets already feature

Bluetooth Smart connectivity, so there is no need for

additional components to communicate with the Drivo

II. However, the more outdated devices might not be

compatible. Please consult your app provider to make sure

that it’s Bluetooth Smart compatible.

NOTE: When the hometrainer is connected to the device

by a Bluetooth Smart protocol, it cannot be connected to

additional Bluetooth devices.

This is a restriction of the Bluetooth Smart protocol itself.

* Warning: should the software / app / device employ

the Speed&Cadence protocol to read speed data, it is

necessary to set a circumference value for the wheel that

equals the real wheel value divided by 3,4. For instance:

if the wheel circumference equals 2095mm, the value to

input as circumference equals 2095 / 3,4 = 616mm.

08_LED LIGHTS

Drivo II transmits speed, cadence and power data via the

ANT+ and Bluetooth Smart protocols.

There are 3 LED lights on the motherboard, displaying

power supply status, motherboard status and the protocol

being used.

The LED lights come in 3 colors with the following

meanings:

Red = status of hometrainer power supply

- Off = Drivo II is not receiving power or has the entered

sleep mode

- On = Drivo II is powered up.

Green = Drivo II is connected via the ANT+ protocol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Drivo II Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info