Bedienungsanleitung Elite Nero (Seite 31 von 105) (Dänisch, Schwedisch, Norwegisch, Finnisch)

782462

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

verify compatibility with one or more of these protocols.

ANT+

ANT+ FE-C: this protocol allows the software / app / device

to receive training data and adjust hometrainer resistance.

This protocol permits total interaction with the hometrainer.

ANT+ Speed&Cadence*: this protocol transmits

hometrainer speed and cadence data. Although more

common than the ANT+ FE-C, it does not allow interaction

and the app/software/ device.

ANT+ Power: this protocol transmits the cyclist’s power

output data. Also much more common than the

ANT+ FE-C, but this protocol does not allow interaction

between the hometrainer and the app/software/device.

With the exception of smartphones that feature integrated

ANT+ connectivity, a USB dongle is necessary to connect

via the ANT+ protocol.

If iOS devices are used, a specific dongle is needed (not

included).

A complete list of ANT+ compatible devices is available at:

http://www.thisisant.com/directory/

BLUETOOTH SMART

Fitness Machine - Indoor Bike service This protocol sends

training data to compatible software / app / device and

adjusts resistance on the hometrainer. This protocol offers

total interaction with the hometrainer.

Speed&Cadence Service*: this protocol transmits

hometrainer speed and cadence data, but does not allow

interaction between software / app / device and the

hometrainer.

Power Service: this protocol transmits the cyclist’s power

output data, but will it also not allow interaction between

software / app / device and the hometrainer. In most cases,

smartphones and tablets already feature Bluetooth Smart

connectivity, so there is no need for additional components

to communicate with the Nero. However, the more outdated

devices might not be compatible. Please consult your app

provider to make sure that it’s Bluetooth Smart compatible.

NOTE: When the hometrainer is connected to the device by

a Bluetooth Smart protocol, it cannot be connected to

additional devices. This is a restriction of the Bluetooth

Smart protocol itself.

* Warning: the circumference to set is 133mm only if the

speed data is displayed using the Speed & Cadence

protocol (both ANT+ and Bluetooth).

04_LED LIGHTS

Nero transmits speed, cadence and power data via the

ANT+ and Bluetooth Smart protocols.

There are 3 LED lights on the motherboard, displaying

power supply status, motherboard status and the protocol

being used.

The LED lights come in 3 colors with the following

meanings:

Red = status of hometrainer power supply

-Off = Nero is not receiving power or has the entered sleep

mode

-On = Nero is powered up.

Green = Nero is connected via the ANT+ protocol.

-Slow blinki = Nero is awaiting connection.

-On = Nero is transmitting data via the ANT+ protocol.

- Fast blink = searching for a power meter (see "05_Power

Meter Link" chapter)

Blue = Nero is connected via the Bluetooth Smart protocol.

-Slow blinking = Nero is awaiting connection.

-On = Nero is transmitting data via the Bluetooth Smart

protocol.

- Fast blink = searching for a power meter (see "05_Power

Meter Link" chapter)

05_POWER METER LINK (PML)

Nero implements also a function, called Power Meter Link,

that allows having much more accurate power data.

This function allows Nero to use a power sensor present on

the bike as power source.

This way, Nero is more precise since the power data

measured by the sensor are more precise than those Nero

can calculate with its formulas.

Note: this function cannot be used if no power sensor is

installed on the bike.

This function can be enabled/disabled at any time by using

the My E-Training app/software.

USE

- Coupling

On start-up, Nero automatically looks for a few seconds for

any power sensors present. If it finds one, it connects to it

and uses its data. For this reason, it is good to ensure that

the power sensor is transmitting before powering the

trainer.

Moreover, once connected, Nero will save the serial

number of the sensor for the following training sessions.

If in the room there are more power sensors, Nero will

connect to the power sensor with the strongest signal, that

will normally be the one on the bike.

To avoid connecting to the wrong power meter we suggest

removing the bike with the power meter that is not

supposed to connect to the Nero.

- Following sessions

The following sessions, every time it is switched on, Nero

will try to connect always to the sensor it coupled with the

first time.

If it cannot connect to the sensor or the sensor is not

present, Nero will use its algorithms to calculate the power.

- Cancelling the coupled sensor

If you wish to change the sensor, just

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Nero Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info