Bedienungsanleitung Elite Nero (Seite 33 von 105) (Dänisch, Schwedisch, Norwegisch, Finnisch)

782462

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

08_CADENCE SENSOR

The Nero uses an innovative “sensorless” system that

utilizes a sophisticated calculation based on speed to track

pedal cadence.

When maintaining a high pedal cadence at low resistance

levels, there may occasionally be a slight inaccuracy in the

cadence value since it is the result of calculation and not

direct monitoring. This occurs especially with fast pedalling

and low resistance.

09_ NAME AND LIST OF COMPONENTS

Platform 1 Ref. A

Upper knob 1 Ref. B

Transmission belts 2 Ref. C

Front roller 1 Ref. D

Central roller 1 Ref. E

Rear roller 1 Ref. F

Front counter wheels 2 Ref. G

Lower knob 1 Ref. H

Oscillating wheels 4 Ref. I

Safety knob 1 Ref. L

10_ASSEMBLY

Your Nero roller should arrive fully assembled, checked and

ready for use.

11_USE

1) Twist the safety switch (Ref. L) to the open position “I”

(Pic. 1).

2) Unfold the hometrainer to its open position (Pic. 2).

3) Place the belts (Ref. C) in their 2 front and rear housings,

making sure the don’t become jammed between the plastic

parts (Pic. 3 – Pic.4 – Pic. 5).

4) Before completely unfolding the Nero, you must adjust

the distance between rollers to make it compatible with

your bicycle’s frame. The adjusting process is conducted

as follows:

- measure the distance from center to center between the

wheels of the bike being used on the Nero (Pic. 6). This

distance is designated as “X”.

- The home trainer adapts to bikes with “X” distance

ranging from 944mm (37 inches) to 1144mm (45 inches).

- The home trainer is preset to a position corresponding to

944mm (37 inches) wheelbase.

If your wheelbase is over 944mm (37 inches), use the

lower knob (Ref. H) (Pic. 7) and extend the bar to the

number closest to dimension “X” according to the graded

scale (Pic. 8).

- Once the correct wheelbase is set, retighten the lower

knob (Ref. H) (Pic. 9).

5) To unfold your Nero completely, grab the front handles

with both hands and give a strong push downwards (Pic.

10 and Pic. 11).

NOTE: to change wheelbase, unfold the roller and loosen

the transmission belt by pulling it out.

! CAUTION !

If the bicycle being used has a wheelbase greater than

1044mm, before using the product, the hometrainer must

be opened gradually (until completely opened) to allow the

belts to stretch naturally.

6) Lock the unit by using the upper knob (Ref. B) (Pic. 12).

7) The Nero is now ready for training sessions!

!CAUTION!

For your own safety, set the hometrainer at 10-15mm

(0.4 - 0.6 inches) forward of the central axis of the front

wheel (Pic. 13). Should the front wheel be positioned too

far forward, it might fall out of the hometrainer.

- The incorrect positioning of the bicycle on the hometrainer

might damage the hometrainer.

12_CONNECTIONS

- Nero has an electronic motherboard that is powered via a

standard power supply adapter (included).

- Connect the power supply to the grid and the jack to the

proper connector on the back of the Nero. A small vibration

indicates that the system is booting up to its initial position.

This operation might last up to 15 seconds.

- The Nero compliance with EU laws (see “Declaration of

conformity”, page 92) may be voided if a different charger

from the original is used.

13_FOLDING THE NERO

1) For ease of transport or to just reduce clutter when not

in use, we suggest folding the frame (Pic. 10 and Pic. 9).

Unlock the system by using the upper knob (Ref. B) (Pic.

15). Grab the Nero by the side of the front edges and fold

the hometrainer (Pic. 16 and Pic. 17).

!CAUTION!

Do not unscrew the knobs completely!

( Rif. B e Rif. H )

NOTE: The safety handle (Ref. L) (Pic. 18) only works when

the wheelbase adjustment is set to the minimum distance.

- To avoid injuries when folding the hometrainer, be careful

of where your hands are placed.

- When transporting the hometrainer, the lower handle

must be tightened completely to avoid losing it (Ref. H).

Without the knob the wheelbase setting cannot be locked

in place.

2) The rollers work best with tyre that has a smooth tread.

If using a mountain bike, to reduce noise and increase

stability change the tyre for one with a slick tread.

3) For beginners, position the rollers in an entrance hall, in

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Nero Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info