Bedienungsanleitung Elite Suito-T (Seite 35 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782457

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

following are available as accessories:

- free-hub body compatible with Campagnolo 9/10/11/12

speed sprocket cassette;

- XD/XDR compatible free-hub body (for SRAM 12-speed

sprocket cassette);

- Micro Spline compatible free-hub body (for SHIMANO

12-speed sprocket cassette);

body replacement instructions can be found on paragraph 20.

SUITO-T is compatible with bikes with 130 to 135 mm hubs

with 5 mm diameter quick release and with bikes with 12 mm

x 142 mm thru-axle hubs.

The following accessories are available:

- adapter for bicycles with 148mm thru axle with 12mm

diameter.

- adapter for bicycles with 135mm thru axle with 10mm and

12mm diameter.

If you are unsure about the type of derailleur on your bicycle,

refer to the bicycle documentation or contact your dealer to

ensure compatibility with SUITO-T.

04_POWER RANGE

The power range covered by the roller is very wide and

depends on the speed. The faster you pedal, the wider the

power range. Nevertheless there may be extreme conditions

where the required power is outside of the range (too high

or too low).

In these cases the roller delivers the maximum/minimum

possible, and resumes working correctly as soon as the

conditions return to being compatible with the power

deliverable by the SUITO-T. When the required power is

outside the available power range, the roller displays on

the monitor the actual power it is producing and not the

theoretical power.

05_SLOPE

The maximum simulatable slope on the SUITO-T is a function

of speed and the weight of the individual rider. In fact, the

power required to pedal up a slope is function of the speed

(faster= more power) and of the weight (the heavier the rider,

the more power is required to climb any given slope).

SUITO-T uses a magnetic braking system that acts directly

on a moving metallic disc to gradually and uniformly adjust

resistance. This technology allows for very accurate changes

in slope, even when small, by taking into account the inertia

experienced when riding on the road. Both increases and

decreases in resistance adjustment are thereby gradual. This

system also ensures that pedals will not lock-up, which could

have occured at exceedingly high power outputs.

06_DATA TRANSMISSION PROTOCOLS

SUITO-T uses two different transmission protocols to interact

and send data to software / app / device.

Please contact the app / software / device manufacturer to

verify compatibility with one or more of these protocols.

BLUETOOTH SMART

"Fitness Machine - Indoor Bike service" (FTMS) protocol.

This protocol sends training data to compatible software /

app / device and adjusts resistance on the hometrainer. This

protocol offers total interaction with the hometrainer.

"Speed&Cadence Service" protocol*: this protocol transmits

hometrainer speed and cadence data, but does not allow

interaction between software / app / device and the

hometrainer.

"Power Service" protocol: this protocol transmits the cyclist’s

power output data, but will it also not allow interaction

between software / app / device and the hometrainer.

In most cases, smartphones and tablets already feature

Bluetooth Smart connectivity, so there is no need for additional

components to communicate with the SUITO-T. However,

the more outdated devices might not be compatible. Please

consult your app provider to make sure that it’s Bluetooth

Smart compatible.

NOTE: When the hometrainer is connected to the device by a

Bluetooth Smart protocol, it cannot be connected to additional

BLE devices.

This is a restriction of the Bluetooth Smart protocol itself.

ANT+

"ANT+ FE-C" protocol: this protocol allows the software /

app / device to receive training data and adjust hometrainer

resistance. This protocol permits total interaction with the

hometrainer.

"ANT+ Speed&Cadence" protocol*: this protocol transmits

hometrainer speed and cadence data. Although more

common than the ANT+ FE-C, it does not allow interaction

and the app/software/device.

"ANT+ Power" protocol: this protocol transmits the cyclist’s

power output data. Also much more common than the ANT+

FE-C, but this protocol does not allow interaction between the

hometrainer and the app/software/device.

With the exception of smartphones that feature integrated

ANT+ connectivity, a USB dongle is necessary to connect via

the ANT+ protocol.

An ANT+ ﬂash drive is required when using Android, PC

Windows and Mac devices. It’s available for purchase on the

www.shopelite-it.com website or via other channels – it’s

required to connect the device to the hometrainer via the

ANT+ protocol.

An OTG adapter cable is required for Android devices, while

iOS devices require a speciﬁc ﬂash drive (not included)

compatible with the 30-pin iOS connector.

A complete list of ANT+ compatible devices is available at:

http://www.thisisant.com/directory/

Wireless speciﬁcations:

Transmission frequencies: 2400 to 2483.5 MHz

Protocols: Bluetooth 4.0 & ANT+

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Suito-T Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elite Suito-T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info