Bedienungsanleitung Elite Suito-T (Seite 37 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782457

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

09_POWER VALUE ACCURACY

Power data sent by SUITO-T is the result of multiple

calculations. These calculations take into account pedalling

speed, hometrainer brake and other factors.

Elite calibrates every single SUITO-T in order to improve

accuracy and reduce any margin of error, though some

factors might change over time and thus decrease power

accuracy.

Spindown is a hometrainer calibration procedure that

evaluates changes arising from prolonged use and

compensates their inﬂuence on the resistance generated by

the hometrainer.

Procedure:

It's important to conduct the calibration when the hometrainer

has been working for at least 10 minutes.

To conduct the procedure, select the related command on

the app or My E-Training software and follow the instructions.

The procedure start command can be found inside the

settings page of the app.

The procedure requires to start pedalling and increase speed

up to a pre-determined value.

Stop right away once you're notiﬁed to stop pedalling.

After a few seconds the procedure will notify that the

calibration procedure has been successfully completed.

The spindown value is then memorized in the SUITO-T so the

correct power data is always sent to every connected device,

including non-Elite third parties software / apps / devices.

Note:

-The previous calibration procedure can also be conducted

with software / apps / devices other than Elite's.

- Do not lift your feet from the pedal until the procedure is

complete.

- The aforementioned notes are no longer valid if the

hometrainer connects to your bike's ergometer (if available)

as power is no longer calculated but measured by the sensor

on the bicycle. Please read the "Power Meter Link (PML)"

chapter for further info.

10_CADENCE SENSOR

The SUITO-T uses an innovative “sensorless” system and it’s

obtained via sophisticated speed-based calculations.

When maintaining a high pedal cadence at low resistance

levels, there may occasionally be a slight inaccuracy in the

cadence value since it is the result of calculation and not

direct monitoring. This occurs especially with fast pedalling

and low resistance.

Should the "sensorLess" system not be accurate enough, you

can purchase a wireless sensor to attach to the bike/crank.

Most apps/software/devices give you the ability to select a

sensor as source for the cadence value.

11_HEART RATE MONITOR

- SUITO-T hometrainer does not read heart rate monitor data.

Heart rate monitor data can be read directly from a device

that includes a heart rate function.

- Compatibility with various types of heart rate monitors

depends on the device / software / app being used only

ANT+ and is also compatible with Bluetooth Smart monitors

allowing connection with monitors by both protocols.

12_USING THE SUITO-T WITH THE SOFTWARE

/ APP / DEVICE

We suggest using the My E-Training software/app, available

on iOS, Android, Windows and Mac OS.

My E-Training is a complete system with several training

modes, including videos, conﬁgurable software, Google Maps

races, Internet competitions and much more.

It's possible to use third-party software that is compatible

with the hometrainer communications protocol/standards.

There are several software/apps/devices currently on the

market that can connect to the SUITO-T.

Please refer to the instructions for the speciﬁc software/app/

device for a proper connection to the hometrainer.

Before beginning the connection procedure with any app,

make sure that the hometrainer is powered up and is not on

the energy saver mode. The supplied hometrainer charger

must be connected to a power source.

The hometrainer motherboard features LED lights indicating

the current hometrainer status. Please check the "Status LED

lights" paragraph for an in-depth description.

13_NAME AND LIST OF COMPONENTS

Your SUITO-T includes:

N.1 SUITO-T body (A)

N.2 Freehub body spacer (B)

N.1 Chainstay adapter (C)

N.1 Right rotating chainstay adapter L=130-135mm (D)

N.1 Left rotating chainstay adapter L=130-135mm (E)

N.1 Right rotating chainstay adapter L=142mm (F)

N.1 Left rotating chainstay adapter L=142mm (G)

N.1 Quick Release (H)

N.1 Riser block (I)

N.1 Power supply (L)

WARNING: adapters ref. C, D, E, F, G are small sized

components and might easily be misplaced or lost. If

you move the hometrainer it's advisable to remove the

adapters and store them in their bag as they might easily

slip out during transport.

Any spare parts are available in our online store or by

directly contacting Elite and/or your country's distributor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Suito-T Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elite Suito-T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info