Bedienungsanleitung Elite Suito-T (Seite 39 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782457

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

19_REMOVING THE BICYCLE

- Shift the bicycle chain on the smallest cassette sprocket of

SUITO-T and of the smallest front chainring of the bicycle.

- Open up the quick release (or remove the thru-axle) and

remove the bicycle from the SUITO-T.

- For transportation or to reduce clutter when not using the

hometrainer: Raise the selectors (Pic. 19) and fold the side

legs (Pic. 20 - 21).

WARNING: the adapters ref. C, D, E, F, G are small sized

components and might easily be misplaced or lost. If you

move the hometrainer it's advisable to remove the adapters

and store them in their bag as they might easily slip out during

transport.

Any spare parts are available in our online store or by directly

contacting Elite and/or your country's distributor.

20_INSTALLATION INSTRUCTIONS FOR FREE-

HUB BODY COMPATIBLE WITH CAMPAGNOLO

9/10/11/12 SPEED SPROCKET CASSETTE,

FREE-HUB BODY COMPATIBLE WITH XD/

XDR SRAM 12 SPEED, FREE-HUB BODY

COMPATIBLE WITH MICRO SPLINE SHIMANO

12 SPEED

- Replace the free-hub body originally present on the

SUITO-T with the accessory compatible with 9/10/11/12

speed CAMPAGNOLO sprocket cassette or XD/XDR

compatible free-hub body (for 12 speed SRAM sprocket

cassette) or Micro Spline compatible free-hub body (for

SHIMANO 12-speed sprocket cassette) following the

following steps:

1) Unscrew the fastening sleeve (Pic. 22).

2) Remove the freehub body from the SUITO-T shaft (Pic.

23).

3) Fully insert the body compatible with CAMPAGNOLO or

XD/XDR or Micro Spline sprocket cassette. (Pic. 24 and

25).

4) Tighten the fastening sleeve with a 17 straddle wrench

with a 5Nm (44in-lbs) tightening torque (Pic. 26). Use the

medium resistance threadlocker suitable for oily surfaces

to lock the sleeve on the shaft.

Only for CAMPAGNOLO compatible body:

- 2 spacers (Ref. B) are usually needed for the 9 speed

cassette (Pic. 5), 1 spacer for the 10 speed cassette (Pic.

6) and no spacer is required for the 11/12 speed cassette

(Pic. 7). Depending on the cassette brand you are using

there might be some differences with the aforementioned

general data.

ATTENTION!

Strictly follow the instructions provided by the cassette

manufacturer with regard to speciﬁc installation techniques,

the need for additional spacers and torque speciﬁcations.

NOTE: Please contact your dealer if you have questions

about installation or if you cannot install the cassette. The

warranty does not cover any damage to the bicycle and/or

SUITO-T in the event of incorrect installation.

21_MAINTENANCE

SUITO-T does not require any speciﬁc scheduled maintenance,

however the following precautions are recommended:

- wipe the trainer clean with a cloth after each training

session to prevent the accumulation of dust and sweat;

- do not clean or degrease the bicycle chain while the bike

is mounted on SUITO-T as solvents can cause irreparable

damage to the bearings or other internal mechanical parts;

- check that the quick release is properly secured and fully

working before every training session.

- Changing a bicycle usually poses no problems after the

assembly on the SUITO-T, though occasionally you might

have to make some adjustments to ensure that it works

properly. Should you have any doubts please contact your

retailer to make sure that it works properly with the SUITO-T.

22_WARNINGS

- SUITO-T becomes hot during use. Wait for it to cool

before touching the resistance unit covers.

- Use the SUITO-T trainer as described in the manual.

- SUITO-T is not equipped with an emergency brake.

- SUITO-T has been designed and manufactured to ensure

maximum safety of the user and/or third parties, but

people, children and pets should be kept away from the

trainer during use as contact with the moving parts of the

trainer and the bicycle may result in damage or injury.

- Never put your ﬁngers or foreign objects of any kind

through the slots on SUITO-T, as there will be high risk of

damage to the trainer and/or serious physical injury.

- Before you start training, place the trainer in a suitable

location, away from any potentially dangerous objects

(furniture, tables, chairs...) so as to avoid any risk of

accidental or inadvertent contact.

- The SUITO-T is to be used by only single rider at a time.

- Always check the safety and stability of the bicycle on

SUITO-T before training.

- No part of the product has any use beyond its original

application. The warranty will be void if the unit has been

opened or tampered with.

- Since the feet are made of soft non-slip material, they

may leave traces of rubber on the ﬂoor during use.

- Do not leave the charger plugged in while not in use.

- Do not store the SUITO-T in cold and damp places. This

may damage its electronic components.

- Use only the supplied charger. The SUITO-T compliance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Suito-T Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elite Suito-T

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info