Bedienungsanleitung Elkron 80TC1L00133 (Seite 68 von 248) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

741458

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

DS80TC1L-001 68

4.4 CAMERA MOTIONS

After selecting a camera, it can be moved either directly using the control panel as described below.

• Panning (horizontal) and tilting (vertical).

• Zooming, focusing and iris opening.

• Preset positions programming and recalling.

These functions can be directly accessed using a single key or joystick or a simple key combination.

4.4.1 Panning (horizontal) and tilting (vertical) functions

The camera may be moved using the joystick on the Ref. 80KP9200133. Move the joystick vertically to tilt the camera

and horizontally to pan it.

The maximum pan span is from 0 to 360 degrees with continuous rotation. The maximum tilt span is from -5 degrees

(camera in vertical position) to 92 degrees (-92 degrees if the -

2 TILT LIMIT option of the CONTROL OPTIONS) menu is

enabled.

The panning and tilting speed can be modulated by operating the joystick appropriately.

However, it should be remembered that the maximum speed of rotation that can be obtained using the joystick is not

always equal to that set in the control options. In fact, it depends on the values of the PROPORTIONAL SPEED and

SPEED LIMIT options (in the MOTION menu) and zoom. If the value of these options is ON, the maximum speed of

rotation that can be obtained with the joystick is reduced proportionally to the enlargement adopted in order to improve

framing.

Panning (horizontal)

Tip the joystick rightwards to turn the camera horizontally clockwise and tip it leftwards to turn it anticlockwise.

If no advanced options are set (e.g. range limits set and enabled), the camera can be turned continuously without

interruptions.

The pan span may be limited between two angles in FUNCTION PROGRAMMING • MOTION • LIMIT OPERATION.

Tilting (vertical)

Tip the joystick upwards to turn the camera vertically upwards and tip it downwards to turn the camera downwards. The

camera rotation is limited upwards by the horizontal plane or downwards by the vertical axis.

Performance will change considerably near the vertical axis according to whether the AUTO FLIP is on or not (default

setting is on).

• With AUTO FLIP off, the camera will stop in perfectly vertical position and will stop turning when the joystick is

tipped downwards.

• With AUTO FLIP on, the camera will proceed over the vertical axis when the joystick is tipped downwards.

This is because, when the vertical axis is reached, the camera flips automatically by 180 degrees and resumes

the initial trajectory.

The AUTO FLIP function can be used to follow a subject arriving in a certain direction passes under the camera and

continues in a straight line. To do this, hold the joystick tipped downwards following the movement of the subject.

Observe that in this case the joystick performance after the camera passes over the vertical axis opposite to the normal

axis because tipping the joystick downwards will turn the camera upwards.

Normal operation of the joystick will be resumed as soon as the downward tip is interrupted (also only for an instant). At

this point, to follow the subject in the same direction, you will need to tip the joystick upwards, as you would normally.

4.4.2 Zoom functions

The camera frame may be adjusted by using the ZOOM +

and ZOOM - commands. Use ZOOM + to zoom into the detail;

use ZOOM -

to zoom out.

Enlargement can be set choosing from the values of optical zoom X28 80TC1L00133 or X36 80TC9K00133.

For further details, refer to the specific section of control mode settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elkron 80TC1L00133 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info