Bedienungsanleitung Elkron MP110M (Seite 14 von 20) (Englisch)

741486

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

(((ELKRON)))

MP110 USER MANUAL

(((ELKRON)))

MP110 USER MANUAL

6.Clock Setting

6.1

Hours/Minutes Modification

1. Enter MASTER code.

2. Press in sequence

and

; the display will show the characters

“ ” flashing to show the introduction of the hours.

• Enter a value between 00 and 23 ( 2 digits required). The display will

show the entered data in a fixed mode.

• The display will show the characters “ ” flashing to show the

introduction of the minutes.

• Enter a value between 00 and 59 ( 2 digits required).

• To confirm and store the entered time, press key

• Before storing the entered time, the entered data are controlled. In case

of inconsistency, an error beep is generated, you quit without modifying

the data and the display will show the characters “ ” flashing to

show a new data introduction. In case of correct data, the new time is

stored and the positive result of the operation is confirmed by an OK

beep. When quitting by timeout, the modification is not saved.

6.2 Date Modification

1. Enter MASTER code.

2. Press in sequence

and

• The display will show the characters “ ” flashing to invite the user

to enter the day of the month.

• By means of the numeric keys enter the date of the desired day (2 digits

from 0 to 31).The display will show the number of the chosen day in a

fixed mode.

• The display will show the characters “ ” flashing to show the

introduction of the month.

• Enter a value from 01 to 12 (2 digits).

• Use the

key for forwas EXCLUDED sensor selection

Use the

key for backward EXCLUDED sensor selection

Use the

to return to the beginning of list

• Press

to exit programming

1. Enter MASTER code +

2. The keypad display will visualize the following message:

TEST CALL.

3. Press key

to start procedure.

The keypad display will visualize the following message:

TEST IN PROGRESS…..

4. At the end of the test, you exit automatically from the procedure.

9. Telephone Line Test

5. Confirm the choice of the telephone number by key

instead of the number, the display will show some dashes “-------------”

6. By means of the numeric keys, enter the desired number. Every dash

“-“ is replaced by the desired digit. To introduce a pause, press

followed by a number key corresponding to the length of the desired

pause: the chosen pause will be visualized on the dash following the

last entered digit. It is possible to cancel a digit by pressing key

7. Press key

to confirm and save the number entered. The

buzzer generates a double beep to confirm the operation and you go

back to point 3.

8. If you want to program or cancel other numbers, use keys

and

to go to the desired number and proceed as described from

point 5 onwards.

9. To cancel a previously programmed telephone number, press key

twice, when the telephone number to be cancelled is

visualized, the buzzer generates a double beep to confirm cancellation.

10.Press key

EXIT

to exit.

AVAILABLE PAUSES

, 1 = 1sec. ----> A

, 5 = 5sec. ----> B

, 9 = 9sec. ----> C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elkron MP110M Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elkron MP110M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info