Bedienungsanleitung Elro DVR154S (Seite 8 von 23) (Englisch)

621095

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

- 15 -

5.5 Software Upgrade (Administrator)

In Menu display, press ▲▼ to change the highlighted option to Software Upgrade, and then press ENTER to call up Software

Upgrade display as shown.

The operations are as f

ollows:

 ▲▼◄

►

Press these buttons to select the items.

 ESC

Press this button to escape from this screen, and return to Menu display.

The following

is a brief description for each item and its specific operations:

 Backup Device – press ENTER to call up Backup Device dialog (if there’s no backup device connected).

 D

isk Storage – to select the disk storage to upgrade. Press +/- buttons to select the available storage.

 Upgrade File – press ENTER to start the upgrade process when the highlighted file is a correct upgrade file. A confirmation

dialog will be shown on the screen, press ENTER to confirm to upgrade the system software.

Note : After the software is upgraded, the system will restart immediately. The split window display will be shown after

estart, please wait a moment.

.6 System Shutdown (Administrator)

In Menu display, press ▲▼

to change the highlighted option to Shutdown, and then press ENTER to shutdown the system. A

confirmation dialog will be shown on the screen, press ENTER to confirm the shutdown. The system will save all the files and all

the states, and then display a power-off message in the rolling screen message area. The user may power off the system safely when

the power-off message is shown.

6. Setup (Administrator)

In Menu display, press ▲▼

to change the highlighted option to Setup, and then press

ENTER to call up Setup Menu display as shown. (To enter Setup Menu display of the

system, please login as Administrator first.)

The user’s operations are described as follows:

 ▲▼

Press these buttons to change the highlighted item.

 E

NTER

Press this button to enter the setup of the highlighted option. For the details of

each option, please refer to the following sections.

 ESC

Press this button to escape from Setup Menu display, and return to Menu display.

If the user wants to reset all the settings to factory default values, he/she may press ▲

▼ to change the highlighted option to

Factory Defaults, and then press ENTER. A confirmation dialog will be shown, press ENTER again to make the changes, ESC to

quit it.

- 16 -

6.1 Pre-Camera Setup

In Setup Menu display, press ▲

▼ to change the highlighted option to Pre-Camera, and then press ENTER to call up Pre-Camera

Setup display as shown.

There are up to 4 cameras which can be connected to the system. The Pre-Camera Setup allows the administrator to define some

undamental attributes for all the installed cameras.

The general operations are as f

ollows:

 ▲

▼◄►

Press these buttons to select the items.

 Numeric

Press these buttons to select the camera.

 ESC

Press this button to escape from this screen, and return to Setup Menu display. If the contents have been modified, a Save

dialog will be shown to ask the user to save the changes, press ENTER to exit and save, ESC to exit without saving.

The following is a brief description for each item and its specifi

c operations:

 REC Resolution – the record resolution for all the cameras in the system. For NTSC, it can be 720x480, 720x240, or 360x240;

for PAL, 720x576, 720x288, or 360x288. Press +/- buttons to select the resolution.

 Installed – whether this camera is installed or not. If installed, the following items will be adjustable. Press ENTER or +/- to

check/uncheck this item. The default setting is “ˇ

ˇˇ

ˇ ” - checked.

 Watermark Press ENTER buttons to change the value

 PTZ ID – the PTZ ID of this camera if it’s a PTZ camera. The PTZ ID has to be consistent with the setting of this camera.

Please refer to the manual of the camera for the ID setting. Press +/- buttons to change the value (N/A or 0-255). The default

setting is “N/A” – Not Available, which means that it’s not a PTZ camera.

6.2 Camera Setup

n Setup Menu display, press ▲▼ to change the highlighted option to Camera, and then press ENTER to call up Camera Setup

display as shown.

The Camera Setup allows the administrator to define the attributes for each camera. There are up to 4 cameras which can be

onnected to the system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro DVR154S Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro DVR154S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info