Bedienungsanleitung Elro DVR154S (Seite 15 von 23) (Englisch)

621095

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

- 29 -

7. PTZ Control

The digital video/audio recorder supports a variety of PTZ cameras. The user can easily control the PTZ cameras through the

operations described in this Chapter if those PTZ cameras have been connected and setup correctly. Please refer to Section 3.2

Optional Connections for the connections. Please refer to Section 6.1 Pre-Camera Setup to set the PTZ ID of each PTZ camera,

and Section 6.9 RS-232/422/485 Setup to setup the control port.

If a camera is also a PTZ camera, there will be an asterisk (*) preceding its title in its video window in split-window display. Please

press PTZ button to enter PTZ control mode if the focus camera is a PTZ camera. The asterisk (*) will be blinked to indicate that

the camera is now in PTZ control mode.

In PTZ control mode, the user’s operations can be divided into general operations and miscellaneous function specific operations,

and are described as follows:

neral operations:

 PTZ

Press this button to exit PTZ control mode. The asterisk (*) will be changed back to normal color.

 ▲▼

Press these buttons to tilt the camera up/down.

 ◄►

Press these buttons to pan the camera left/right.

 ZOOM ( ) +/-

Press these buttons to zoom in/out the camera.

 GOTO

Press this button to move the camera to the preset position. The keypad hint will be shown. Press numeric buttons 0-9 to

enter the number of the preset position to move the camera to. The range of the preset positions is 00-99.

 NEXT

Press this button for the next miscellaneous function. The miscellaneous functions include Focus, Iris, Auto PAN, SEQ, Preset,

and Pan Speed. And the active one will be shown on the lower right corner of the screen. The miscellaneous function specific

operations are described in the following table.

Miscellaneous function specific operations:

Active function Operations Descriptions

Focus

ENTER

focus far/near

auto focus

Iris

Iris increase/decrease

Auto Pan (3)

+/-

ENTER

Auto pan speed is shown in parenthesis

increase/decrease speed

start/stop Auto Pan

set start position

set end position

SEQ (5 sec.)

+/-, NUMBER

ENTER

SEQ dwell time is shown in parenthesis. If SEQ mode is on, the

camera will go to preset position 0-9 (or 1-10) sequentially.

change dwell time

start/stop SEQ mode, an asterisk (*) will be shown if SEQ mode

is on

Preset (1)

+/-, NUMBER

ENTER

Preset location is shown in parenthesis

change Preset location

set Preset location

Pan Speed (3)

+/-

Manual pan speed is shown in parenthesis

increase/decrease speed

- 30 -

8. Search/Playback/Archive (Administrator, Supervisor)

There are three ways to search the recorded video/audio for playback:

(a) Search by time,

(b) Search by event,

In split-window display, press SEARCH button to call up Search

Menu display as shown.

The user’s operations are described as follows:

 ▲▼

ress these buttons to change the highlighted item.

 ENTER

Press this button to enter the corresponding Search display of the highlighted item. The Search displays and their operations

are described in the following sections, followed by the playback operations of the searched video/audio.

 ESC

Press this button to escape from Search Menu display, and return to split-window display.

.1 Search By Time

The screen for Search By Time is shown on the right side:

The Status field will show the ‘Recorded from’ time based on the

selected Video/Audio before searching - alarm partition if any of

Alarm, Motion, or Video Loss, is checked, and normal partition if

Normal is checked.

The general operations are as follows:

 ▲▼

Press these buttons to select the items.

 ESC

Press this button to escape from this screen, and return to

split-window display.

 SEARCH / MODE

Press this button to start searching the recorded video/audio with the selected search time and video/audio type for playback.

The search result will be shown on the bottom of this dialog if it failed. If there’s no camera in playback mode, all the

cameras in the current split window will be set to playback mode.

 Play Button ( )

Press this button to start playing the recorded video/audio with the selected search time and video/audio type. The search

result will be shown on the bottom of this dialog if it failed. If there’s no camera in playback mode, all the cameras in the

current split window will be set to playback mode.

 Copy Button (

)

Press this button to backup (copy) the selected type of recorded video/audio starting from the Search Time (described below)

in the HDD to the connected backup device without playback. The Backup display (described in Section 8.4

) will be shown.

Please note that this kind of backup is performed in the background, and the user can still do almost all the operations.

The following is a brief description for each item and its specific operations:

 Search Time – (Year, Month, Date, Hour, Minute) for the recorded video/audio. The playback (or backup) will start from

the time entered here when the user press the playback buttons (or Copy button) later. Press +/

- buttons to modify each item.

 Video/Audio – (Alarm, Motion, Video Loss, Normal). Check the types of the recorded video/audio you want to search for

playback. Press ENTER or +/- to check/uncheck each item.

Elro DVR154S Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro DVR154S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info