Bedienungsanleitung Emax BCF640 (Seite 5 von 12) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

553581

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

3PCLIOBCF60

VITROCERAMIC HOB

User instructions

GENERAL INFORMATION

Carefully read the contents of this leaet since it

provides important instructions regarding safety of

installation, use and maintenance.

Keep the leaet for possible future consultation.

All the operations relating to installation (electrical

connections) must be carried out by specialised

personnel in accordance with current regulations.

SAFETY WARNINGS

It is recommended to use at-bottom pans with a

diameter equal to or slightly larger than that of the

heated area Fig.3.

Do not use pans with a rough base in order to prevent

scratching the heat surface of the cooking hob.

This appliance is not suitable for use by children or

persons requiring supervision.

IMPORTANT

- Avoid spilling liquid, therefore to boil or heat liquids,

reduce the heat.

- Please ensure when the appliance is turned on, that

there are no empty pots left on top.

- When you have nished cooking, switch off the

relevant heating element with the command indicated

hereinafter.

h WARNING h

If the surface of the hob is cracked, turn off the

appliance and disconnect from the electrical main in

order to avoid any possible electric shocks.

INSTALLATION INSTRUCTIONS

These instructions are for a specialized installer and

are a guide for the installation process, regulations and

maintenance in accordance with the law and current

standards.

POSITIONING

The domestic appliance was built in order to be

encased on a work surface, the way it is illustrated in

the graph (g.1A).

Predispose sealing material (g.1D) along the whole

perimeter (the dimensions of the cut Fig.1A).

Lock the domestic appliance into place with 4

supporters (g.1B), keeping in mind the width of the

surface (Fig.1C).

ELECTRICAL CONNECTIONS (g.2)

Before making the electrical connections, check that:

- the system ratings meet the ratings indicated on

the identication plate xed on the lower part of the

worktop;

- the system is tted with efcient ground wires in

accordance with the laws and current standards.

Grounding is mandatory by law.

If the domestic appliance is not supplied with a cable

and/or suitable plug, use material suitable for the

absorption value indicated on the identication plate

and the operating temperature.

At no point must the cable reach a temperature of 50°C

higher than room temperature.

If wishing to make a direct connection to the mains, an

omnipolar switch must be installed with a minimum 3

mm opening between the contacts and appropriate for

the load indicated on the plate and in accordance with

current standards (the yellow/green ground conductor

must not be disconnected by a switch).

When the appliance has been installed,the omnipolar

switch must be easily reachable.

USE AND MAINTENANCE

MAINTENANCE

Remove any residues of food and drops of grease

from the cooking surface by using the special scraper

supplied on request (Fig.4)

Clean the heated area as thoroughly as possible using

suitable products, and a cloth/paper, then rinse with

water and dry with a clean cloth.

Using the special scraper (optional) immediately

remove any fragments of aluminium and plastic

material that have unintentionally melted on the heated

cooking area, or residues of sugar or food with a high

sugar content (Fig.4).

This way, any damage to the cooktop surface can be

prevented. Under no circumstances should abrasive

sponges, or corrosive chemical detergents, such as

oven sprays or stain removers, be used.

USE

Rotate the controls placed on the oven, taking into

consideration that to a higher number corresponds a

higher heat supply

The pilot lights are ON when:

- at least one element is inserted.

- the top tenperature at the Indicated spot is higher

than 50°C.

DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE),

requires that old household electrical

appliances must not be disposed of in the

normal unsorted municipal waste stream. Old

appliances must be collected separately in

order to optimise the recovery and recycling of the materials

they contain and reduce the impact on human health and

the environment. The crossed-out dustbin symbol on the

product reminds you of your obligation regarding separated

waste collection. Consumers should contact their local

public service or their local dealer for more information on

the correct disposal of exhausted household appliances.

THE MANUFACTURER DECLINES ALL

RESPONSIBILITY FOR EVENTUAL DAMAGES

CAUSED BY BREAKING THE ABOVE WARNINGS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emax BCF640 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info