11. Fill in at ‘Send PW’ the password.
12. Fill in at ‘Recv Email’ the email address of the recipient.
13. Click ‘APPLY’.
14. Click ‘OK’.
15. Click ‘Exit’ until you are at the main menu.
8.0 Accessing the EM6015 locally
You can view the live video of the DVR and change settings on your Windows
computer using Internet Explorer.
1. Connect a UTP networking cable to your network (router or switch) and connect
the other end to the LAN port of the DVR.
2. Click ‘Main Menu’.
3. Enter your password (if setup before) or leave it empty.
4. Click ‘Advanced’.
5. Click ‘Network’.
6. Check if the DVR has received an IP address.
7. Open the Internet Explorer on your computer
8. Enter the IP address from the DVR in the address bar. For example, if the DVR
has the IP address 192.168.1.120, you need to enter ‘http://192.168.1.120’ in the
address bar.
9. Press Enter to open the page.
10. A message will appear asking if you want to install ‘DvrOcx.ocx’. Accept this to
continue. If a message bar appears, right click on the bar and choose ‘Run
ActiveX element’.
11. Click ‘Run’, the page will be then be reloaded.
12. You will now see a login page where you can enter your username and or
password.
If you do not see the login page or see some kind of error, you need to follow these
steps to correct this.
1. In the Internet Explorer, open the menu ‘Tools’.
2. Go to ‘Internet Options’
3. Go to ‘Security’.
4. Select the zone you are currently working in (Local Intranet or Internet is most
common).
5. Click ‘Custom level’
6. Check if ‘Download unsigned ActiveX controls’ is set to ’Enable’.
7. Check if ‘Initialize and script ActiveX controls not marked as safe..’ is set to
‘Enable’.
8. Click OK.
9. Click Apply or OK.
10. Try the first 10 steps from this chapter again to open the webpage of the DVR.
