Bedienungsanleitung Emtec 4in1 (Seite 6 von 65) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch)

122716

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

No need to select the TV mode.

 SHIFT+Volume+/-:menunavigationkeys,allowyoutonavigate

left and right into the menu of your appliances.

[9] Teletext MIX: Allows to mix the Teletext and the picture of the

selected channel.

[10]Mute:Allowsyoutoturnon/offthesound.Youcancontrolthe

«Mute» function of your TV even when you are in VCR, DVD or SAT

mode. No need to select the TV mode.

 SHIFT+Mute:OKkey,conrmstheselection.

[11] Teletext OFF:

TV mode: Stop Teletext.

 SHIFT+TeletextOFF:ExitMenu.

[12] Teletext Hold: Stop page change in Teletext mode.

[13]Numerickeys0-9:Workthesamewayasyouroriginalremote.

[14] Teletext ON:

 TVmode:Start/stopTeletext.

 SHIFT+TeletextON:MenuON.

[15] ENT: If you are in programming mode – automatic code

search-youcanconrmthecodeofthedeviceyouwanttocontrol.In

connectionwiththenumerickeys,thisbuttonallowsyouwithsome

equipment to select directly channels higher than 9.

[16]A/V:Selectionofanexternalsource(SCARTinput).

[17] Play, FF, Stop, Rew, Pause:

 InVCR&DVDmode:Thesebuttonsworkthesamewayasin

your original remotes.

 InTVmode:Fasttextfunction(colouredkeys).

 REC(record):Thiskeyworksthesamewayastheoneonyour

originalremoteforyourVCR.Inordertoavoidamistakeyouhaveto

pressthiskeytwicetoactivatethisfeature.

4) Programming your TV, VCR, DVD and SAT modes

Note: You can dedicate any appliance (TV, DVD, SAT...) to the VCR,

DVD,orSATkeys:youjustneedtoenterthe4digitcode(foundin

thecodebook)oftheappliance,i.e.aVCRcodeundertheSATkey.

In any case, follow the steps below:

1. Makesureyourequipmentisswitchedon(forexampleTV).

2. PressandholdtheSETUP(4)keyuntiltheLEDindicator(1)lights

continuously.ReleasetheSETUPkey.

3. Pressandreleasethemodekey(3)ofthedeviceyouwantto

control (for example TV).

4. Enterthe4digitcode(13)fromtheCodeBook.TheLED(1)turns

off after the last digit is entered. If you entered a wrong code the LED

blinksfor3secondsandthengoesoff.Youhavetorepeatfromstep2.

5. Point the remote in the direction of your TV and press the POWER

button(2).Yourdeviceshouldturnoff.Checkotherfunctions(for

example for a VCR: FF or REW etc.). If certain functions are not

responding this indicates that the entered code is not the correct one.

In that case repeat the above procedure with the next corresponding

code of your brand.

6. Repeat this procedure from step 1 for the other equipment you want

to control (TV, VCR, DVD, SAT)

5) Manual code search

If your equipment (TV, SAT etc....) does not respond, try the other

codes for your brand. If it still doesn’t respond, try the Code Search

method.

Note: As you can dedicate any appliance (TV, DVD, SAT...) to the

VCR,DVDorSATkeys,youneedrsttoenterany4digitcodefor

thekindofapplianceyouwishtocontrol(foundinthecodebook),

i.e.:IfyouwanttoprogramaSATundertheVCRkey,enteranySAT

codefoundinthecodebookandthenfollowthestepsbelow:

1. Makesureyourequipmentisswitchedon.Ifnotswitchiton

manually.

2. Press and hold SETUP (4) until the LED indicator lights steadily.

Release SETUP

3. Pressthemodekey(3)thatmatchestheequipmentyouwantto

control (for example TV).

4. PressPROG+(7)repeatedlyuntilthePROGchanges.Ifyoustep

pastthecorrectcodeusePROG-(7)togobacktotherightcode.

5. When the equipment you want to control reacts press ENT (15) to

conrmthecode.That’sall.

Note:Ifyourequipmentdoesn’thavePROG+,youcanusePLAY

(VCRorDVD)(17)orPOWER(2)key.

The search starts after the last registered code. If that was 0030, the

search starts at 0031 until the last possible code and then goes from

0000 to 0029.

Note: if certain functions of your equipment can’t be controlled you

havetondadifferentcodeforyourbrand.

6) Automatic code search

Whensearchinganunknowncode,youcanstepthroughthelibrary

automatically (AutoSearch). When your equipment responds, you can

stop the searching process and store the code you found.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec 4in1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info