Bedienungsanleitung Emtec H510 (Seite 6 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

473755

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

1110

Setting Up Your Favourites, cont.

(6)

(7)

Using The Remote

Assuming you followed the steps on the previous pages and have set up some devices and

some favourites you can now use the remote. See the sections that follow to set up more

devices and/or favourites, and to set up other functions.

Using the remote

Press the or key at any time to access the favourites you’ve set

up. Or press the FAVOURITE key, then select your favourites group.

Then press the Side Key next to the logo to change your device to

that channel. Selecting a favourite group that has not yet been set up,

takes you to the setup Wizard.

Important: Make sure you point the remote at your device until the

channel changes. Pressing a favourite key might send the commands

for say channel 162, but if you don’t point the remote at your device

until all three digits are sent you might just get channel 16, or even

channel 1. Watch the flickering halo at the bottom left of the screen,

it flickers for each digit sent. It also shows what device is being

controlled.

Press the HOME key at any time to access the screen where you

can set things up, or access other features.

Press the MODE key, then select a device type to change the mode that the remote is in. E.G.,

if the remote is in Cable mode then the hard keys such as Channel Up/Down, Volume Up/

Down, numbers, etc., operate your cable box.

Also, when you select a mode, any extra keys for that mode, and any keys you’ve learned for

that mode are displayed. The current mode that the remote is in is displayed with an icon in

the lower left of the screen. In the above example it’s in TV mode. Press or to return to

your favourites screen.

Before you continue, press Side Key K5 next to the Help icon and follow the prompts to get

an idea of how to use the remote.

QuickPower

QuickPower is a way of quickly turning all your devices on or off

from one easy to use screen.

Press the HOME Key to go to the Home screen.

Then press the Side Key next to QuickPower.

Only Devices you’ve previously set up are displayed. The others are

grayed out.

Press any key that isn’t grayed out to send the “Power” command for

that device.

Sleep

Sleep lets you set any device to turn off a preset time from now. You

can set the off time in increments of 15 minutes, up to a Maximum of

90 minutes.

Press the HOME key to go to the Home Screen, then press the Side

Key next to Sleep.

You can set a sleep timer for any or all of the devices that you’ve set

up, i.e., any that are not grayed out.

In this example we only have a TV, Cable Box and Satellite Receiver

set up.

Below, we pressed Side Key K1 next to the TV icon once, to set a

sleep timer of 15 minutes.

We pressed Side Key K2 next to the Cable Box icon twice, to set a

sleep timer of 30 minutes.

And we press Side Key K7 next to the Sat icon five times to set a

sleep timer of 1 hour and 30 minutes.

You can continue to add favourites, up to a total of 10 (you can add

more later, see page 13). At screen (6) you choose if the favourites

you just set up are stored in the group or the group. Later you

can set up favourites in lots of different Groups, not just and .

Selecting takes you to screen (7) showing that you now have 4 set

as the first favourite in the Group (at the location next to Side

Key K1), as well as any other favourites you set up. (Note, you can

reorder, i.e., move the positions of the logos later).

When you’re finished setting up your favourites, press the HOME

key (located to the left below the screen) to go back to the Home

screen.

At any time you can press the FAVOURITE key and then select ,

or press the key at the top left hand side of the remote to go to

screen (7) above. Then pressing the key next to the 4 logo will (in

this case) change the channel on your Cable to 4 (in this case channel

4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec H510 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info