Bedienungsanleitung Emtec H510 (Seite 7 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

473755

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

1312

Pressing OK takes you back to the Home screen with your sleep timers

saved. The next time you select the Sleep screen you’ll see that the

sleep timers have started to count down.

Make sure you leave the remote pointing at the device(s) you’ve

set Sleep Timers for so it can send the Power command to the

device(s) at the time(s) you’ve set.

Sleep, cont.

Macros

The Macros allow storing sequences of commands. You can program

and store up to 27 sequences of successive keystrokes for several keys

of your choice. By pressing one the respective Macro key already

programmed, this sequence of successive keystrokes (IR commands) is

sent. Any sequence of successive keystrokes performed frequently may

be reduced to only 2 commands (MACRO side key from the Home

Menu and then the choosen macro) .

For example, by pressing MACRO and then the choosen Macro, you

can turn on your TV set, display your favourite channel, turn on your

DVD recorder and start a recording, etc.

You can store a sequence of 99 commands for each Macro.

If no macro were programmed, the remote control will invite you to set

up one (See page 16)

Setting up more Devices

When you first inserted the batteries in the remote you likely went

through the Wizard and set up a few devices. Here’s how to set up

more devices. Press the HOME key to display the Home screen. Then

press the Side Key next to Setup. Then press the Side Key next to

Devices.

Then pick a device you want to set up. Note, it doesn’t have to be a

device that is grayed out. You can also select any device that’s already

set up (not grayed out) and change its settings. From this point, setting

up a device is the same as you learned in the Wizard. See pages 7 and

8. Note, you can select Aux 1 or Aux 2 from the Devices screen and

then select any type of device to set up under either Aux key.

Or you could select any device, and then press Change Type repeatedly,

on screen (1) above, to scroll through the devices and change to TV

(for example) to set up a second TV. Selecting Label, on screen (2) lets

you rename the device, e.g. you could call it Den TV, and have another

called Liv Rm TV.

Note: “Triple tap” name entry works in a similar fashion to text entry

on a cell phone. Tap each numeric key to cycle through ALL caps,

numbers, and lower case letters. So at screen (3) you could press the 6

key to enter M, then the 9 key 8 times for a lower case y, then the zero

key twice for a space, then the 8 key for T, then the 8 key three times

for a V, to enter My TV. See pages 9, and 17 for more details on entering

text to change labels.

(1)

(2)

(3)

Setting up more Favourites

When you first inserted the batteries in the remote you likely went

through the Wizard and set up a few favourites. You could only set up

10 favourites at that time. Here’s how to set up more favourites. Press

the HOME key to display the Home screen. Then press the Side Key

next to Setup.

Then press the Side Key next to Favourites.

Then press the Side Key next to Wizard.

Then pick the group that you want to set up favourites in, (or add

more favourites to). If you pick an existing group that you previously

set up favourites in, say , any new favourites will be added to the

ones you already set up. If you already set up 10 favourites a new

page will be added (you can have 10 pages of favourites).

Groups that have not yet had any favourites added to them are grayed

out, but can still be selected. From this point adding favourites is the

same as you learned in the Wizard, so follow the directions on the

screen (see also pages 8-10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec H510 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info