Bedienungsanleitung Emtec H510 (Seite 9 von 74) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

473755

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

1716

Setting up more Favourites, cont.

Renaming Favourite Groups

This lets you Rename the groups that you save your favourites in. For

example you might want to rename

to Dave, or to Isabel.

Press the HOME key, select Setup, and then select Favourites. Then at

the screen to the right select Rename.

Note, none of the groups are grayed out so you can even rename

groups that don’t yet have any favourites set up in them. Pick the

group that you want to Rename, e.g. .

You enter the new name for the favourites group using the numeric

keys on the remote, in a similar fashion to typing in text on a cell

phone. E.G. in this example we pressed the 3 key on the remote to

enter the letter “D.” Then we pressed the 2 key repeatedly until the

letter “a” was displayed. Then we waited a second and repeatedly

pressed 8 to select “v.” Then we waited a second and repeatedly

pressed the number 3 key until “e” was selected.

When you’ve entered the new name, press OK to save the new name

for the favourites group.

Setting up more Macro

The Macros allow storing sequences of commands. You can program

and store up to 27 sequences of successive keystrokes (max 99) for

several keys of your choice.

Press the HOME key to go to the Home Screen, then press the Side

Key next to Setup then select Macro.

The next screen displays all the names per default of the Macros you

can setup.

NOTE: The existing Macros already Programmed are in green colour.

Press the screen key next to the name of the Macro you want to setup.

(M1, M2….)

NOTE: It will be possible to rename later on the name of the macro

(name limited to 6 characters to avoid conflict with screen display).

Tip: Set up your macro on a sheet of paper by writing down the series

of keystrokes that is composed of.

If you press the button Mode or Favourite or Home, you'll exit from

Setup Macro screen.

Select the device that will receive the command by pressing

successively on the side key next to Pick Device. In the scrren at the

right we have selected TV

To define the first command assigned to the device selected press the

key of your choice, if you want to choose a side key, press first on

the side key next to Pick key and then on the side key of your choice.

(the keys Mode, Favourite and Home can not be entered in a Macro).

Press each of the keys in the order you want for your macro.

You can change the Device you will send the command to by pressing

the key next to Pick Device.

You can add a delay between each command, just press the side key

next to Set delay (1 to 9s delay).

When you have finished all the actions associated to the Macro you

can store it by pressing the side key next to Save.

To clear a Macro press the screen key next to Delete, than you have

to confirm in pressing the Side key next to Yes or pressing the side

key next to Quit you return to the previous state.

To leave push the screen key next to Done.

Note: IT is possible to define up to 27 Macros of 99 series of

keystrokes that is composed.

To rename your Macro press the side key next to Rename (no more

than 6 characters to avoid display problems).

Note: “Triple tap” name entry works in a similar fashion to text

entry on a cell phone. Tap each numeric key to cycle through ALL

caps, numbers, and lower case letters. So at screen to the right you

could press the 6 key to enter M, then the 9 key 8 times for a lower

case y, then the zero key twice for a space, then the 8 key for T, then

the 8 key three times for a V, to enter My TV. See pages 11, 12, and

23 for more details on entering text to change labels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Emtec H510 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info