Bedienungsanleitung Enduro AS101 (Seite 41 von 48) (Deutsch, Englisch, Holländisch, Französisch)

722072

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ENDURO

autoSteady 34

Ref: AS101-UM-TKI-0114-Rev. A

Do not exceed the total safe working load of the laden weight of the original corner steady.

Sensitive objects such as cameras, DVD-Players etc. must not be kept in the storage box near the

control unit or the motor cable. They can be damaged by the electromagnetic fields.

Do not make any modifications to the autoSteady system (mechanical or electronic). This can be very

dangerous! No warranty claim will be accepted and we cannot warrant the function of the autoSteady

system if any modifications are made. We will not be liable for any damage whatsoever caused as a

result of incorrect installation, operation or modification.

OPERATION - REMOTE CONTROL HANDSET

The supplied double mode remote control handset (6) can be used for the EN

DURO

autoSteady system and

most EN

DURO

caravan manoeuvring systems (models >2013). The control mode can be selected by moving

the slide switch (Fig. 10O) to “Caravan manoeuvring system mode” or “autoSteady system mode”.

The remote control handset (6) is powered by one PP3 9Volt battery, and is activated by moving the slide

switch to “On”-I (Fig. 10A). Once activated the green LED (Fig. 10H) will illuminate and the controls can now be

used.

Fig. 10 (autoSteady mode

A – Main power slide switch: “Off”=O and “On”=I.

B – Up button in individual mode: Select the draw-back function for single corner steady function buttons.

After this button is pressed, the red LED above this button will light up. Then you can push the single corner

steady function buttons for draw back. Without this selection the single corner steady function buttons are not

workable. If there is not any operation within 30 seconds, the LED will turn off and invalidate the “UP” choice.

C – Down button in individual mode: Select the lower function for single corner steady function buttons.

After pressing this button, the red LED below this button will light up. Then you can push the single corner

steady function buttons for lower. Without this selection the single corner steady function buttons are not

workable. If there is not any operation within 30 seconds, the LED will turn off and invalidate “Down” choice.

D – Right-front single corner steady function button: Adjust Right-front corner steady (see Fig. 8) draw

back or lower by keep pushing the button. Choose the “UP” or “DOWN” button first.

E – Left-front single corner steady function button: Adjust Left-front corner steady (see Fig. 8) draw back

or lower by pressing the button. Choose the “UP” or “DOWN” button first.

F – Right-back single corner steady function button: Adjust Right-back corner steady (see Fig. 8) draw

back or lower by keep pushing the button. Choose the “UP” or “DOWN” button first.

G – Left-back single corner steady function button: Adjust Left-back corner steady (see Fig. 8) draw back

or lower by pressing the button. Choose the “UP” or “DOWN” button first.

H – Green power LED: Power LED continuously lights up when the system is activated (by moving slide switch

of the remote control to “On”-I). If the remote control is far away from the control unit, beyond the availably

distance, this LED will start blinking.

I - Two handed buttons for automatic up function: The “AUTO UP” button must be pressed for more than

3 seconds. The blue “automatic function” LED will blink and the buzzer also gives a beep per second. Then the

automatic draw back process begins. If press it for less than 3 seconds, nothing happens (this is a setup to

avoid misoperation). After three seconds the automatic lower or draw back begins, and the blue “automatic

function” LED will illuminate constantly. Now you can release the button, and the draw back process will auto

process. After the automatic draw back process is completed, the buzzer will give a beep.

J - Two handed buttons for automatic down function: The “AUTO DOWN” button must be pressed for

more than 3 seconds. The “automatic function” LED will blink and the buzzer also gives a beep per second.

Then the automatic lower process begins. If press it for less than 3 seconds, nothing happens (this is a setup to

avoid misoperation). After three seconds the automatic lower process begins, and the “automatic function” LED

will illuminate constantly. Now you can release the button, and the lower process will auto process. After the

automatic lower process is completed, the buzzer will give a beep.

Before the corner steadies move downwards, there maybe a several second delay without any operation or the

corner steady draw back a short time (about 3 seconds). This is normal.

K - Blue “automatic function” LED: Reflects status of the “AUTO UP” and “AUTO DOWN” system.

L - Red overload LED: Amp overload protection is activated. Wait about 60 seconds and try again.

M - Blue 9V battery LED: The internal 9V battery of handset is near empty and needs to be replaced.

N - Blue battery voltage LED: The caravan battery voltage is too low or too high.

O - Control mode slide switch: The control mode can be selected by moving the slide switch (Fig. 10O) to

“P” or “Q”. If moving the slide switch (Fig. 10O) to “P” (indication becomes red), the combined remote handset

is working in the caravan manoeuvring system mode. If moving the slide switch (Fig. 10O) to “Q” (indication

becomes red), the combined remote handset is working in the autoSteady mode.

P - Caravan manoeuvring system mode indicator: Reflects status of remote handset. When the remote

handset is set into the caravan manoeuvring system modes, an EN

DURO

caravan manoeuvring system can be

controlled via this remote handset. Please see functions of the buttons in the caravan manoeuvring system user

manual. NOTE: in this mode the autoSteady system will not work!

Q - autoSteady control mode indicator: Reflects status of remote handset. When the remote handset is set

into the autoSteady system modes, the autoSteady system can be controlled via this remote handset. NOTE:

in this mode the caravan manoeuvring system will not work!

Enduro AS101 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info