Bedienungsanleitung Engenius Durafon 4X - SP922 (Seite 19 von 27) (Englisch)

490413

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Call Transfer

1. While a telephone call is in progress, you can place call on

hold and transfer the call.

2. Press HOLD soft key to put call on hold.

Press OPTION soft key to enter feature list for selection.

4. Press number “2” and enter a two-digit Handset ID to call

another handset extension.

a. Un-announced Call Transfer:

Press “END” before the destination handset answers, the

call is automatically transferred to the destination handset.

b. Announced Call Transfer:

(1) Speak to the destination handset.

(2)

Press XFER soft key or the END to end announcement. The

call is transferred to the destination handset.

Notes: If the destination handset does not answer after handset

paging timeout, the call is routed back to the originating handset.

3-Way Conferencing

1. While a telephone call is in progress, you can place call on

hold and bring in another phone line or another handset for

a 3-way conference.

Press HOLD (Right) soft key to put the current call on hold.

Press OPTION (Right) soft key to enter selection menu.

3-Way Conferencing with a Second Handset:

a. Press number “2” and enter a two-digit Handset ID to

call another handset extension.

After the second handset answers, press the CONF

(Left) soft key.

c. Two handsets and one phone line can now talk

simultaneously. Any one party can drop out of the 3-

way conferencing, leaving the remaining two parties still

in conversation.

3-Way Conferencing with a Second Phone Line:

a. Press number “1” and enter a phone number to call

another phone line.

After the second line answers, press the CONF (Left)

soft key.

c. One handset and two phone lines can now talk

simultaneously.

I. If one phone line hangs up, the handset continues

talking to the remaining phone line.

II. If the handset presses END key, the 2nd phone

line will be dropped. The handset and the first

phone line continue conversation.

Notes:

1. 3-way conferencing between 3 handsets is not supported.

2. Unlike 3-way conferencing provided by the phone company, 3-

way conferencing involving 2 phone lines will take up two

physical lines, leaving only two lines left available for other

handsets. The handset must have access to a second line.

Call Forwarding

A handset can direct the base station to forward all future

phone calls to be routed to another handset or another

phone number.

Press handset MENU (Right) soft key.

Press the number “5”, this will enter the handset setting

menu.

Press number “3”, handset enters call forwarding setting

mode.

Use Up/Down arrow to scroll up and down the selection

(Off, Another Handset, External Line).

Make a selection (default = Off) and press SAVE (Left) soft

key.

When prompted, enter a two-digit handset ID or an external

phone number, up to 14 digits.

A warning message “All calls are forwarded” will appear on

the handset LCD.

To turn off call forwarding, repeat the above procedures and

select “Off”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius Durafon 4X - SP922 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info