Bedienungsanleitung Engenius EP 801 (Seite 24 von 152) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~47~

Re：The base ID for 1

base is “10”, for 2

base is

“20”, for 3

base is “30”, for 4

base is “40”.

Notes:

1. When initial setting the “Multi-Base”, you have to select the BS #1

first, then followed the above steps to select 2

, 3

or 4

base.

2. For synchronization mechanism, all handsets must be register again

before start using multi-base scenario. i.e. the initial handset ID with

1x must register to BS1, and the rest handsets must be registered to

, 3

or 4

base respectively.

3. After all above processes, the “Multi-Base” is complete then.

Call Manager

“Call Manager” feature allows two options：

1.One is the handset to be set to receive incoming calls or make outgoing

calls (2-way intercom, broadcast and transferred call are allowed). The

option is selectable by base 1 to base 4.

2.The other option is the handset to be set to access to available bases

automatically or manually.

For 1

option (Subscribe BS)：

Press MENU, followed by “4” to enter the Call

Settings mode.

Press “5” to select Call Manager.

Press “1” to set Subscribe BS.

Re：When entering the submenu of Subscribe BS,

the LCD will show the available bases which

already subscribed.

Call Manager

1.Subscribe BS

SELECT BACK

Press or key to select the desired base (#1~4), press

CHANGE (Left) soft key to set the Subscribe BS ON/OFF.

4. If set the Ssubscribe BS ON, that means the handset is able to access

the line of the desired base, so the handset is able to make outgoing call

or answer incoming call via the desired base.

On the contrary, if set the Ssubscribe BS OFF, then the handset can’t

access the line of the desired base, so the handset isn’t able to make

outgoing call or answer incoming call via the desired base.

~48~

For 2

option (BS Selection)：

Press MENU, followed by “4” to enter the Call

Settings mode.

Press “5” to select Call Manager.

Press “2” to set BS Selection.

Re：Default setting is “OFF”.

Call Manager

2.BS Selection

SELECT BACK

Press CHANGE (Left) soft key to set the BS Selection ON/OFF.

Re：If BS Selection set “ON”, when pressing

or key, the LCD will show the available bases

(Lines), i.e. 1, 2, 3, 4. Press digit “1”, you can access

to base 1 to get the line.

Visual Message Waiting Indicator (VMWI)

VMWI feature supported the FSK message which received from telephone

line; It will activate a message icon of handset and flash the broadcast LED

of base.

Notes:

1. A subscription to telephone company voice mail service is required.

2. If the handset still indicates the icon even after you have listened all messages,

turn it off by pressing and holding “Caller ID” key on the handset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info