Bedienungsanleitung Engenius EP 801 (Seite 6 von 152) (Englisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~11~

b. Distinctive alert sounds indicating various events:

(1) Single beep: successful key entry.

(2) Double beep: indicates power on/off.

(3) Triple beep: failed operation.

(4) Periodic 1-Long-2-Short beep (every 1 minute): low battery warning、

out of range、call on hold

Re:

No any beep for invalid key entry

TALK/FLASH ( )

a. Places or answers a telephone or intercom call

b. Sends a Flash signal to phone line to retrieve a dial tone after the call

ends, or to perform the call waiting feature provided by local phone

companies during a call.

SPEAKERPHONE ( )

a. Press the key to enable/disable the speakerphone during incoming,

outgoing or intercom call.

2-WAY INTERCOM / TRANSFER ( )

a. Places an intercom call to another handset, a group handset (group

paging) or all registered handsets.

b. Intercom calls are digital, full duplex, and are conducted without the

assistance from the base.

BROADCAST ( )

a. Half duplex broadcasting to handsets for immediate announcement

b. Half duplex broadcasting to base stations

Re：Press the key on the side of handset to activate the broadcast

function.

7. Left/Right Soft Keys ( )

a. Make menu selection.

Up( ) /Down( ) Scrolling Keys

a. Scroll through records and menu selections.

b. Adjust receiver voice volume when in the Talk mode.

Press to adjust ringer volume when in the Standby mode.

Press to enter phonebook when in the Standby mode.

END; On/Off Key ( )

Ends a call.

b. Leaves current menu operation, up one level.

~12~

c. Press for 3 seconds to off the power

10.

CALLER ID Key ( )

Review caller ID list.

b. Including received and missed caller ID.

Additional Handset Features

1. Multiple handsets registration

Up to 9 handsets can be registered to a base station

b. ID 11-19: individual Handset IDs.

c. ID 91-99: Group IDs. Handsets can “subscribe” from the handset

menu to group(s) and be paged when a landline caller or an

intercom caller enters a Group ID.

2. Ringer Vibrator

a. For incoming call ringing & intercom ringing.

b. Six-level ringer volume selections (Off/Low/Medium/High/Vibrate/

Vibrate & High)

Eight ringer type selections

3. Caller ID

a. Displays incoming call phone number and name on the LCD (needs

Caller ID service from local telephone company)

4. Call waiting with caller ID

a. Displays 2

incoming call information on the same phone line when

call is in progress (needs Call Waiting with Caller ID service from

local telephone company)

5. Name tagging with caller ID

a. Match the caller ID with the phone book entries; once matched, the

LCD screen will display the name or nickname instead of pure caller

ID info (needs Call Waiting with Caller ID service from local

telephone company).

6. DND (Do Not Disturb, i.e., Silent Ring)

7. Call Logs

a. Redial: Stores 10 phone numbers (up to 26 digits each) dialed most

recently. Can perform last-number redial on all 10 numbers.

b. Received & New Call Log: Total 50 entries (16-digit phone number,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info