Bedienungsanleitung Engenius EP 801 (Seite 7 von 152) (Englisch)

458104

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

~13~

16-character names, and Date/Time stamp), needs Caller ID service

from local telephone company.

c. Phone numbers and names can be saved into phonebook while in

display.

8. Call barring

a. Block the users from dialing the long distance calls or international

calls.

b. Up to 5 digits of each call barring setting; up to 5 entries allowed.

c. If you need to dial a specific number to retrieve the dial tone, you

need to key in that number while setting the call barring.

[Note] You need to key in the accurate user ID and password to perform

this feature. The default password is “0000”.

Any Key Answer (except and SILENT Soft Key)

10.

Key-guard

a. When the keyguard is selected, all keys will be locked.

Press UNLOCK (Left) soft key followed by “＊” to release it.

11.

Dialing Prefix

a. Up to 14 digits, including pause(s), one access code can be pre-

programmed to be added automatically in front of the dialed number

when dialing from call logs, phonebook, and dial-and-send dialing.

12.

Call Hold

a. Places call on hold

13.

Mute

a. Press MUTE (Left) soft key during talk, the handset microphone will

be muted.

Press UNMUTE (Left) soft key to release it.

14.

Phonebook

a. 50 entries, each stores a phone number or handset ID (up to 26

digits) and name (up to16 characters)

b. Alphabetically sorted display and search by letter.

c. Dial from display.

d. During the stand-by mode, you can enter the phone book by

pressing scrolling key.

15.

Key tone

a. Four-level key tone volume selections (Off/Low/Medium/High).

~14~

b. Four key tone type selections.

16.

Call Timers

a. Display call time duration for current call during and immediately

after the call.

17.

Programmable Feature Call

a. Allow user to pre-program the most frequently used Feature code

into EP801 which is adjunct to the PBX system.

Up to 10 entries can be saved.

Once the feature code being programmed, you can quick perform

those functions during the call by pressing OPTION soft key.

18.

PA On/Off

a. Enable or disable the broadcast function.

b. When PA is Off, the handset can’t receive broadcast from base or

other registered handsets; But it can broadcast to base or other

registered handsets.

19.

Menu Display

a. To avoid mis-setup in the “Call Settings”(MENU-4), “Phone Settings”

(MENU-5), “Base Settings” (MENU-6) and Multi-base Setting

(MENU-7-3), these settings can be hidden.

b. Password is required before enter Menu Display (MENU-8), the

default handset password is “0000”.

c. When enable the settings, these setting will not displayed any

longer, unless disable them by entering Menu Display again.

20.

Group Setting

a. Allow handset to subscribe to one or several groups.

Re: Up to 9 groups can be subscribed.

21.

Custom Name

a. Allow changing the “EP801” screen to the desired wording or info,

such as the user’s name.

Re: Up to 32 characters can be entered.

22.

Change Pwd

a. Allow changing the handset password which requires to enter in Call

Barring (MENU-4-3) and Menu Display (MENU-8) .

Re:Default is “0000”.

23.

Change PIN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP 801 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP 801

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info