Bedienungsanleitung Engenius EP800 (Seite 20 von 351) (Englisch)

619916

Zoom out

Zoom in

Vorherige Seite

1/351

Nächste Seite

~39~

original handset will go back to standby mode

automatically.

Notes: If the destination handset does not answer after handset

paging or transferring timeout, the call is routed back to the

originating handset.

Phonebook Operations

You can store up to 50 entries in the phonebook.

Each entry can contain a phone number or handset ID

(up to 26 digits) and a name (up to16 characters).

To access the phonebook, press MENU (Right) soft

key, followed by 2 ; or press scrolling key while

the handset is in standby mode.

Main Menu

2.PhoneBook

SELECT BACK

To add a new entry:

Press ADD (Left) soft key.

Enter the name when LCD prompts “Name?” Use

DELETE (Right) soft key to delete the last digit

entered. When completed, press SAVE (Left) soft

key to save.

Re: Up to 16 characters can be entered as the

name.

You will then be prompted to enter a number

for the

name just entered.

Re: Up to 26 digits can be entered as the number.

After entering the number, press the SAVE (Left)

soft key to save this entry into phonebook.

Enter a phonebook entry without a name, the all

records without name will be placed on top of the

phonebook list.

To enter the name, press the corresponding

keypad number one or more times according to the

~40~

order of the character on the key.

See table below for a list of available characters

and their orders. For example, press 2 once for

the character “A”, twice for “B”, etc.

Notes:

When enter a phone number, the cursor automatically advances to

the next digit field. Use or scrolling key to move the

cursor backward or forward to insert or delete (the digit above the

cursor, or left of the cursor if cursor is on the right of the last digit).

When entering a name, the cursor automatically advances to the

next character field if you press a different key for the next character.

If you need to enter consecutive characters from the same key, you

can wait for the cursor to advance or use or scrolling key

to move the cursor backward or forward manually. Also use

or to move the cursor to insert (to the left of the cursor) or

delete (the character above the cursor, or left of the cursor if cursor

is on the right of the last character).

By default, all letters are entered in the upper case. Use the * key to

toggle between upper and lower cases.

A “Pause” entry represents a 1 second delay in dialing the following

digits, which is useful when calling a sequence of segmented

numbers (e.g., access code, credit card number, auto-attendant

entries, etc.) Pause is entered by pressing the ＃ key twice (LCD

displays P). Entering pause twice (PP) will result in 2 seconds pause

in the dialing.

Character Table:

Key Characters and Orders

1 ‘ + , . * ( ) & 1

2 A B C 2

3 D E F 3

4 G H I 4

5 J K L 5

6 M N O 6

7 P Q R S 7

8 T U V 8

9 W X Y Z 9

0 0

＊

Caps – when in character editing.

＊– when in number editing.

Space & ＃ – when in character editing

# & P (Pause) – when in number editing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP800 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info