Bedienungsanleitung Engenius EP802 (Seite 21 von 346) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

620000

Zoom out

Zoom in

Vorherige Seite

1/346

Nächste Seite

~41~

4. The entries are alphabetically sorted and stored as a list in an ascending

order (A to Z) from the top of the list.

5. The first line of LCD display shows name and the 2

line shows the

phone number. If the phone number is longer than 16 digits, press

OPTION (Right) soft key and select Option 3 “View Number” to view the

complete number.

6. To search for a record:

Use

scrolling key to enter the Phone Book mode.

b. Press a key that corresponds to the first character of the name you

are looking for.

c. For example, you are looking for “EnGenius”, and then press the

number 3 once.

Use

or scrolling key to locate the exact record you are

looking for.

7. To erase phonebook:

Use or scrolling key or the alphabetical

search method to locate the record to be erased or

edited.

b. Press OPTION (Right) soft key to enter option

menu.

Press 1 to erase the desinated phone entry.

LCD shown “Delete entry?” Press YES (Left) soft

key to confirm your change.

8. To edit phonebook:

Use

or scrolling key or the alphabetical

search method to locate the record to be erased or

edited.

b. Press OPTION (Right) soft key to enter option

menu.

Press 2 to edit the desinated phone entry.

~42~

9. Dial from display:

Press

or to dial the phone number or Handset ID

displayed.

10. To transfer phonebook:

To transfer phonebook, both parties have to enter the phonebook transfer

mode firstly by following below:

Press OPTION right soft key follow by 5 or or scrolling key

to transfer when handset in phonebook mode.

For phone sending party, press 1 to enter sending mode.

i. Either press TX ALL(left softkey) to transfer all phonebook entries

to another handset(s).

ii. Or press TX ONE (right softkey) to transfer one entry to another

handset(s).

iii. Press 2-digit handset ID or group ID, then select all phonebook

entries or one entry to be transferred.

Re : “00” means all handsets

iv. During phonebook transferring, LCD shows “Sending” and 2-digit

countdown on the LCD to indicate the phonebook numbers which

are waiting for sending.

For phonebook receiving party, press 2 to enter receiving mode.

i. When entering the receiving mode, LCD shows “Ready”.

ii. Start to receive phonebook, LCD shows “Get phonebook from

Ext. # : xx”.

iii. A beep emitted when receiving each phonebook.

iv. When the phonebook receiving, 2-digit countdown on the LCD to

indicate the phonebook numbers which are waiting for receiving.

Re: The phonebook transfer through the wireless interface, it may partially

miss transmission by interference.

Call Barring

1. Block the users from dialing the long distance calls or international calls.

And also block the incoming call from outside line or other registered

handset.

You need the password to enter the setting. The default password of

handst is “0000”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP802 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info