Bedienungsanleitung Engenius EP802 (Seite 19 von 346) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

620000

Zoom out

Zoom in

Vorherige Seite

1/346

Nächste Seite

~37~

registration, the handset display will show ”Please

Notes:

1. The base station has a 30 second registration timeout starting

from pressing the PAGE button. The handset has a 6 second

registration timeout starting from the registration or de-

registration option has been selected. The base station and

handset will automatically exit registration mode after timeout.

2. Repeat registration or de-registration process if unsuccessful.

Handset Group Subscription

1. Up to nine handset groups (91-99) can be defined and

handsets can decide which group(s) they want to be

in.

2. For example, Group 1 represents the Customer

Service Group, Group 2 represents the Sales Group,

and Group 3 is the Marketing Group. Suppose that

Handset 11 wants to receive incoming rings for all

Sales and Marketing related calls. Then handset 11

will need to “subscribe” to Group 2 and Group 3.

Call Settings

2.Group Setting

SELECT

BACK

3. Group Selections:

Press handset MENU-4 to enter the Call Settings

Press number “2”, handset enters group setting

menu.

c. Press OPTION soft key and followed by “1” key to

subscribe the group (“9＃＂, ＃:1~9). Enter 1~9.

d. Repeat for all desired groups.

e. Delete group selections by pressing OPTION soft

key and followed by “2” to Unsubscribe the group.

Notes:

~38~

1. The handset can change group affiliations at any time.

2. The base station is not responsible for group assignments.

Consequently, it cannot de-subscribe a handset from a group.

3. When an intercom caller enters a group ID, all handsets

subscribed to this group will ring. The first handset to answer will

establish a link with the caller. Afterward, it is a one-to-one call,

not a one-to-many call.

Call Transfer

While a telephone call is in progress, you can transfer it between different

handsets.

Direct transfer

Press

key to put the call on hold.

Press XFER (Right) soft key, followed by the

destination handset ID, then the held call will be

transferred directly.

After the call transferred to destination handset, the

original handset will go back to standby mode

automatically.

Indirect transfer

If you want to talk to the destination handset before the

call transferred, you can follow with below method:

During the call, press

key, followed by entering the

destination handset ID.

Press the or of the destination handset to

answer the intercom call, you can now talk to the

destination handset. After the talking, press

to end

the intercom call, then the destination handset is able

to pick up the incoming call automatically.

After the call transferred to destination handset, the

original handset will go back to standby mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Engenius EP802 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Engenius EP802

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info