Bedienungsanleitung Entrematic Ditec DOITOB IP2015 (Seite 10 von 30) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

609394

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

DOITOB - IP2015

GENERAL SAFETY PRECAUTIONS

This installation manual is intended for professionally

competent personnel only.

The installation, the electrical connections and the settings

must be completed in conformity with good workmanship and

with the laws in force. Read the instructions carefully before

beginning to install the product. Incorrect installation may be a

source of danger. Packaging materials (plastics, polystyrene,

etc) must not be allowed to litter the environment and must

be kept out of the reach of children for whom they may be a

source of danger. Before beginning the installation check that

the product is in perfect condition. Do not install the product in

explosive areas and atmospheres: the presence of flammable

gas or fumes represents a serious threat to safety.

Before installing the motorisation device, make all the structu-

ral modifications necessary in order to create safety clerance

and to guard or isolate all the compression, shearing, trapping

and general danger areas. Check that the existing structure

has the necessary strength and stability. The manufacturer

of the motorisation device is not responsible for the non-

observance of workmanship in the costruction of the frames to

be motorised , nor for deformations that may be occur during

use. The safety devices (photoelectric cells, mechanical ob-

struction sensor, emergency stop, etc) must be installed taking

into account: the provisions and the directives in force, good

workmanship criteria, the installation area, the funtional logic

of the system and the forces developed by the motorised door

or gate. The safety devices must protect against compression,

shearing, trapping and general danger areas of the motorized

door or gate. Display the signs required by law to identify dan-

ger areas. Each installation must bear a visible indication of

the data identifying the motorised door or gate.

Before connecting to the mains check that the rating is

correct for the destination power requirements.

A multipolar isolation switch with minimum contact gaps of 3

mm must be included in the mains supply.

Check that upstream of the electrical installation there is an

adequate differential switch and a suitable circuit breaker.

When requested, connect the motorized door or gate to an

effective earthing system carried out as indicated by current

safety standards. During installation, maintenance and repair

operations, cut off the power supply before opening the cover

to access the electrical parts.

The electronic parts must be handled using earthed

antistatic conductive arms. The manufacturer of the

motorising device declines all responsability in cases where

components which are incompatible with the safe and cor-

rect operation of the product only original spare parts must

be used. For repairs or replacements of products only original

spare parts must be used. The fitter must supply all informa-

tion corcerning the automatic, the manual and emergency

operation of the motorised door or gate, and must provide

the user the device with the operating instructions. It is recom-

mended that antistatic conductive earthed arm bands be worn

when manipulating electronic parts.

MACHINERY DIRECTIVE

Pursuant to Machine Directive (98/37/EC) the installer who mo-

torises a door or gate has the same obligations as a machine

manufacturer and shall:

- prepare technical documentation containing the documents

indicated on Schedule V of the Machine Directive;

(The technical documentation shall be kept and placed at the

disposal of competent national authorities for at least ten years

starting on the date of manufacture of the motorised door);

- draw up the EC declaration of conformity according to Sche-

dule II-A of the Machine Directive;

- affix the CE mark on the motorised door pursuant to para.

1.7.3 of Schedule I of the Machine Directive.

For more details, refer to the “Guidelines for producing tech-

nical documentation” available on Internet at the following

address: www.ditec.it

APPLICATIONS

Service life: 3 (minimum 10÷5 years of working life with 30÷60

cycles a day)

Applications: FREQUENT (For vehicle or pedestrian accesses

to town houses or small condominiums with frequent use).

- Performance characteristics are to be understood as referring to

the recommended weight (approx. 2/3 of maximum permissible

weight). A reduction in performance is to be expected when the

access is made to operate at the maximum permissible weight.

- Service class, running times, and the number of consecutive

cycles are to be taken as merely indicative having been statisti-

cally determined under average operating conditions, and are

therefore not necessarily applicable to specic conditions of

use. During given time spans product performance character-

istics will be such as not to require any special maintenance.

- The actual performance characteristics of each automatic access

may be affected by independent variables such as friction, bal-

ancing and environmental factors, all of which may substantially

alter the performance characteristics of the automatic access or

curtail its working life or parts thereof (including the automatic

devices themselves). When setting up, specic local conditions

must be duly borne in mind and the installation adapted accord-

ingly for ensuring maximum durability and trouble-free operation.

DECLARATION BY THE MANUFACTURER

(Directive 98/37/EC, Annex II, sub B)

Manufacturer: DITEC S.p.A.

Address: via Mons. Banfi, 3 - 21042

Caronno P.lla (VA) - ITALY

Herewith declares that the electromechanical automatic system

series DOIT OB:

- is intended to be incorpored into machinery or to be assembled

with other machinery to constitute machinery convered by

Directive 98/37/EC;

- is in conformity with the provisions of the following other

EEC directives:

Electromagnetic Compatibility Directive 2004/108/CE;

Low Voltage Directive 2006/95/CE;

and furthermore declares that it is not allowed to put the ma-

chinery into service until the machinery into which it is to be

incorporated or of which it is to be a component has been found

and declared to be in conformity with the provisions of Directive

98/37/EC and with national implementing legislation.

Caronno Pertusella, Fermo Bressanini

09-10-2008 (President)

Entrematic Ditec DOITOB IP2015 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info