737384
27
Zoom out
Zoom in
Vorherige Seite
1/319
Nächste Seite
Projector Parts and Functions
27
Name Function
A
Screw holes (for
installation)
The screw holes for securing the Touch Unit.
Remove the rubber caps from the screw holes, attach
the Touch Unit, and replace the rubber caps to hide the
screws.
B
Laser diffusion ports Diffuse laser light to detect the position of fingers.
C
Indicator light Lit when the Touch Unit is turned on.
D
Screw holes (for
installation)
The screw holes for securing the Touch Unit to a
commercially available table mount when installing
vertically on a desk.
E
Security slot The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
F
TCH port Connects the projector to the Touch Unit with the
Touch Unit connection cable.
G
Installation magnets Magnets used for installation.
Attention
Do not connect the Touch Unit to any devices except for EB1485Fi/EB1480Fi.
The device could malfunction, or laser light could leak beyond the limit.
Make sure you use the supplied Touch Unit connection cable. Operations are
not possible with a commercially available cable.
When disposing of the Touch Unit, do not disassemble it. Dispose according to
your local or national laws and regulations.
a
See your projector's Installation Guide for the Touch Unit installation
methods and angle adjustment methods.
gg Related Links
• "Safety Instructions for Interactive Touch Operations" p.103
• "Using Interactive Touch Operations with Your Finger" p.102
• "Getting the Latest Version of the Documents" p.10
Safety Instructions for Magnet
Both the pen stand and touch unit contain powerful magnets. Be sure to
follow these important guidelines when using these devices.
Warning
Do not use the device near medical equipment such as pace makers. Furthermore,
when using the device, make sure there is no medical equipment such as
pacemakers, in the surrounding area. Electromagnetic interference may cause
medical equipment to malfunction.
Caution
Do not use the device near magnetic storage media such as magnetic cards, or
precision electronic devices such as computers, digital watches, or cell phones.
Data could be corrupted or a malfunction could occur.
When installing the device on a magnetic surface, be careful not to trap your
fingers or any other part of your body between the magnet and the installation
surface.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-1480Fi wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-1480Fi

Epson EB-1480Fi Bedienungsanleitung - Deutsch - 338 seiten

Epson EB-1480Fi Bedienungsanleitung - Holländisch - 336 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info