Bedienungsanleitung Epson EB-1480Fi (Seite 29 von 319) (Englisch)

737384

Zoom out

Zoom in

Vorherige Seite

1/319

Nächste Seite

Projector Placement

You can install the projector on a wall or ceiling, or place it on a table to

project images.

To install the projector on a wall, you must use an optional mount. To mount

the projector from a ceiling or vertically on a desk, you can use a

commercially available mount compatible with the VESA Mounting Interface

Standard (100 × 100 mm).

Note the following points when selecting a projector location:

• Place the projector on a sturdy, level surface or install it using a compatible

mount.

• Leave plenty of space around and under the projector for ventilation, and

do not place it on top of or next to anything that could block the vents.

• Place the projector so it squarely faces the screen, not at an angle.

If you cannot install the projector squarely facing the screen, correct

any resulting keystone distortion using the projector controls. For the

best quality images, we recommend adjusting the installation position

of the projector to achieve the correct image size and shape.

• When you install the projector to a fixed location, turn on the Fixed

Installation setting in the projector's Installation menu.

• When you place the projector vertically, turn on the Vertical Installation

setting in the projector's Installation menu.

Warning

• A special method of installation is required when suspending the projector from

a wall or ceiling. If you do not install the projector correctly, it could fall and

cause damage or injury.

• Do not use adhesives on the wall mount plate fixing points or other mount

fixing points to prevent the screws from loosening, or use lubricants, oils, or

similar substances on the projector; the projector case may crack causing it to fall

from its mount. This could cause serious injury to anyone under the mount and

could damage the projector.

• Failure to install the ceiling mount and projector may cause the projector to fall.

After installing the specific Epson mount that supports your projector, make

sure you secure the mount to all of the projector's ceiling mount fixing points.

Also, secure the projector and the mounts using wire that is strong enough to

hold their weight.

• Do not install the projector in a location subject to high levels of dust or

humidity, or in a location subject to smoke or steam. Otherwise, it could cause a

fire or electric shock to occur. The projector's case could also deteriorate and be

damaged causing the projector to fall from the mount.

Examples of environments that could cause the projector to fall due to case

deterioration

• Locations subject to excessive smoke or airborne oil particles, such as factories

or kitchens

• Locations containing volatile solvents or chemicals, such as factories or

laboratories

• Locations where the projector could be subjected to detergents or chemicals,

such as factories or kitchens

• Locations in which aroma oils are often used, such as relaxation rooms

• Near devices that produce excessive smoke, airborne oil particles, or foam at

events

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-1480Fi Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-1480Fi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info