Bedienungsanleitung Epson emp tw680 (Seite 32 von 58) (Englisch)

214790

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Configuration Menu Functions

(Setting is not possible when signals are being input from the [HDMI ] input port.)

Use , , and to move the display position for images.

(Setting is only possible when Color Mode is "Natural", "Theatre", "Theatre Black 1", or "Theatre Black

2", and composite video

, S-Video

, component video

, or RGB video signals are being input.)

If bright white areas of images such as clouds and T-shirts on the beach in summer appear uneven and

overexposed, set to "On". When set to "On", the "DVI-Video Level" setting will be ignored.

(Setting is only possible when composite video

, S-Video, component video or 525i and 625i RGB video

signals are being input.)

Interlace

(i) signals are converted to progressive (p) signals using a method appropriate for the image.

• Off :This is ideal for using when viewing images with a large amount of movement.

• Video :This is ideal for general video images.

• Film :When the input source is a film, the image equivalent with its original source will be projected.

(Setting is not possible when composite video, S-Video, or computer signals are being input.)

This changes the display area (the part of projected images).

• Normal (92% display) : Input signals are projected at the normal image size. TV images are

displayed at 92% size.

• Larger (100% display) : The areas at the top, bottom and sides of images that cannot normally be seen

are inserted and projected. Interference may occur at the top or bottom of the

images depending on the image signal. In such cases, try to adjust the display

position ("Position"). p.30

• Auto : Displayed when the signals from [HDMI

] input port are being input. Signals

are automatically projected at 100% or 92% size depending on the input

signals. (Not displayed when the equipment's DVI port is connected to the

projector's [HDMI] input port.)

(Setting is only possible when composite video or S-Video signals in NTSC

format are being input or

when component video or RGB video is selected as an image source. Setting is not possible when

computer signals are being input.)

If using products designed for destinations such as South Korea that have different black level (setup

level) settings, use this function to obtain correct images. Check the specifications of the connected

equipment when changing this setting.

(Setting is only possible when RGB video is being input from the [HDMI] input port and "EPSON Super

White" is set to "Off".)

If the projector's [HDMI] input port is connected to the DVI port of a DVD player or similar equipment

using an HDMI/DVI cable, set the video level for the projector to match the video level that has been set

at the DVD player. The setting at the DVD player can be either Normal or Expand.

Displayed for input sources other than computer

Position

Advanced

EPSON Super White

Progressive

Output Scaling

Setup Level

DVI-Video Level

*1 The setting values are stored separately for each image source and signal type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson emp tw680 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson emp tw680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info