Bedienungsanleitung Epson emp tw680 (Seite 33 von 58) (Englisch)

214790

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Configuration Menu Functions

Configuration Menu

"Settings" menu

This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts

images to their optimum condition when the input signal is changed. The three automatically adjusted

items are "Tracking

", "Position" and "Sync ."

All the adjustment values on the "Image" menu, except "Aspect

", are returned to their default values.

(If the aspect mode is set to "Wide", keystone correction cannot be set.)

This is used to correct keystone distortion in images. The same correction can be carried out using the

projector's control panel. p.17

When the main power switch is turned on, you can set for projection to start (On) / not start (Off) without

pressing or .

When set to "On" with the power left on, be aware that sudden surges of electricity that may occur when

the power comes back on after a power outage may cause the projector to turn on.

The projector is equipped with a power-saving function that causes the power to turn off automatically

and the projector to switch to standby if no signal is input to the projector for a continuous length of time.

The length of time before the power-saving function operates can be selected from four available settings.

If "Off" is selected, the power-saving function will not operate.

If you press while the projector is in standby mode, projection will start again.

This turns the trigger function on and off to determine whether the projector's power on/off status and

problems with projector operation are communicated to an external device.

If you change the setting, the new setting will take effect after the power has been turned off and the cool-

down period is complete.

This locks the power on function of the button on the projector's control panel, so that a child cannot

accidentally turn the projector's power on and look into the projector's lens. When the lock is applied, the

power will only turn on if is pressed down for about 3 seconds. can be used to turn off the power,

and the remote control will continue to operate as normal.

If you change the setting, the new setting will take effect after the power has been turned off and the cool-

down period is complete.

When the "Direct Power On" is set to "On", be aware that projection starts immediately as main power

switch is turned on.

If this is set to "On", you can't operate the projector's control panel buttons and a icon appears on the

screen when a button is pressed. To cancel, press and hold on the projector's control panel for about

seven seconds or more.

If you change the setting, the new setting will take effect after exiting the configuration menu.

Auto Setup

Reset

Keystone

Operation

Direct Power On

Sleep Mode

Trigger Out

Child Lock

Operation Lock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson emp tw680 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson emp tw680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info