Bedienungsanleitung Epson StylusPhotoR340 (Seite 26 von 40) (Englisch)

19327

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

26 Maintenance and Transporting

5. Look at the alignment pattern in each set and find

the patch which is most evenly printed, with no

noticeable streaks or lines.

6. Press the r button, then press the u or d button to

highlight the number for the best pattern (1 to 9)

in set #1, then press the OK button.

7. Repeat step 6 to select the best pattern for sets #2,

#3, and #4.

8. When you have finished, press the OK button.

Cleaning the Printer

To keep your printer working at its best, you should

clean it several times a year. Follow these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all paper, then use a soft brush to clean

any dust or dirt from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp

cloth.

4. Use a soft, dry cloth to clean the LCD panel. Do

not use liquid or chemical cleaners on the LCD

panel.

5. If ink has spilled inside the printer, wipe it off only

in the area shown below using a soft, damp cloth.

w Warning:

Do not touch the gears inside the printer.

c Caution:

❏ Be careful not to wipe away lubricating grease inside the printer.

❏ Never use a hard or abrasive brush, or alcohol or thinner for

cleaning; they can damage the printer components and case.

❏ Do not get water on the printer components and do not spray

lubricants or oils inside the printer.

❏ Do not apply grease to the metal parts under the print head

carriage.

Transporting the Printer

If you move your printer some distance, you need to

prepare it for transportation in its original box or one

of a similar size.

c Caution:

To avoid damage, always leave the ink cartridges installed when

transporting the printer.

1. Turn on the printer, wait until the print head locks

in the far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet.

Then disconnect the printer cable from the printer.

3. Remove any memory cards from the printer and

close the memory card cover.

4. Remove any paper from the printer, push down

the paper support extension, and close the paper

support.

5. Open the printer cover. Secure the ink cartridge

holder to the printer with tape as shown, then

close the printer cover.

6. Make sure the CD/DVD tray guide is closed, then

push in the output tray extension and close the

output tray.

7. Repack the printer and its attachments in the

original box using the protective materials that

came with them.

Keep the printer level as you transport it. After

transporting the printer, remove the tape securing the

print head and test your printer. If you notice a decline

in print quality, clean the print head (see page 25); if

output is misaligned, align the print head (see

page 25).

Clean here

Tape the ink

cartridge holder

to the printer case

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson StylusPhotoR340 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson StylusPhotoR340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info