Bedienungsanleitung Epson SureColor SC-F2000 (Seite 18 von 104) (Englisch)

617671

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

❏ Do not bend or pull the waste ink tubes. Otherwise

ink may leak inside or outside the printer.

❏ The print head may not be capped (i.e., may not

move to the right-hand side) if an error occurs and

the printer is turned off without first resolving the

error. Capping is a function for automatically

covering the print head with a cap (lid) to prevent

the print head from drying out. In this case, turn on

the power and wait a while until capping is

performed automatically.

❏ When the printer is on, do not disconnect the power

plug or cut the power at the breaker. The print head

may not be capped properly. In this case, turn on the

power and wait a while until capping is performed

automatically.

❏ To keep the print head in the optimum operating

condition, the ink and cleaning liquid are also used

in maintenance operations such as head cleaning in

addition to printing.

❏ Do not remove ink cartridges while the printer is

operating. A malfunction may occur.

❏ The caps, wiper unit, flushing pad, tubes, carriage

scale, and air filter require periodic maintenance.

Replace or clean them if a message is displayed.

Print quality declines if maintenance is not

performed.

U “Periodic Maintenance” on page 48

❏ Do not move the movable base or the platen

manually. Otherwise a malfunction may occur.

❏ To keep the print head in optimum operating

condition, maintenance is performed when the

printer is turned on. If the printer is turned on and

off frequently, more ink is consumed in each

maintenance operation. We recommend leaving

the power on to reduce ink consumption. To reduce

ink consumption, we recommend leaving the

power on when using the printer.

Notes for when not using the

printer

Note the following points when you are storing the

printer. If the printer is not stored correctly, you may

not be able to print properly the next time it is used.

As well as the following, there are additional points to

note when using White ink. Check the following points.

U “Notes on Handling White Ink” on page 19

❏ If the printer is not used for a long time (with the

power off), perform the prolonged storage

operation using the separately sold Cleaning

cartridge. If the printer is left in this condition, it

may be impossible to clear clogging in the print

head. See the following for details.

U “Prolonged Storage” on page 66

❏ We recommend that you print once a week if the

printer is not used for a long time without

performing the prolonged storage operation. If you

do not print for a long time, the print head nozzles

may become clogged.

❏ If you do not use the printer for a long time, make

sure you check for clogged nozzles before printing.

If clogged nozzles are detected in the print head,

perform head cleaning.

U “Checking for clogged nozzles” on page 44

❏ Even if the printer is not turned on, ink that has

accumulated in the waste ink tubes may leak out.

Make sure the waste ink bottle is installed even

when the printer is not on.

❏ Make sure that the print head has been capped (the

print head is positioned at the right edge) before

storing the printer. If it is left uncapped for a long

time, the print quality may decline, and it may be

impossible to clear clogging in the print head. If the

print head is not capped, turn the printer on, check

that capping has been performed, and then turn it

off.

❏ Close all covers when storing the printer to prevent

dust and other foreign matters getting in.

If the printer will be not be used for an extended

period, protect it with an anti-static cloth or other

cover.

The print head nozzles are very small, and they can

become clogged easily if fine dust gets on the print

head, and you may not be able to print properly.

SC-F2000 Series User’s Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F2000 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info