Bedienungsanleitung Epson SureColor SC-F2000 (Seite 19 von 104) (Englisch)

617671

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Notes on Handling Cartridges

Note the following points when handling cartridges to

maintain good print quality.

As well as the following, there are additional points to

note when using White ink. Check the following points.

U “Notes on Handling White Ink” on page 19

❏ When installing ink cartridges for the first time, a

lot of ink is consumed to fill all parts of print head

nozzles to get the printer ready for printing. Be sure

to have replacement cartridges ready soon.

❏ We recommend that ink and Cleaning cartridges be

stored at room temperature out of direct sunlight

and used before the expiry date printed on the

packaging.

❏ To ensure print quality, we recommend that ink

and Cleaning cartridges be used up within a year of

their installation.

❏ Ink cartridges and Cleaning cartridges that have

been stored at low temperatures for an extended

period should be allowed to return to room

temperature over a period of four hours before use.

❏ Do not touch the IC chips on the cartridges. Doing

so may prevent normal operation and printing.

❏ Install ink and Cleaning cartridges into all slots. The

printer cannot print unless cartridges are installed

in all slots.

❏ Do not leave the printer without cartridges

installed. The ink in the printer may dry, preventing

it from printing as expected. Leave cartridges in all

slots even while you do not use the printer.

❏ Information such as the remaining levels is

managed by the IC chip to allow the cartridge to be

continuously used after being removed and

re-installed.

❏ If you remove an ink cartridge before it is empty,

wipe off any ink that is stuck on the ink supply port

using the cleaning stick in the supplied

maintenance kit. If ink dries on the supply port, it

may leak when it is reinstalled.

Make sure that the supply port is free of dust when

storing cartridges. The port does not need to be

capped since there is a valve inside.

❏ Removed ink cartridges may have ink around the

ink supply port, so be careful not to soil the

surrounding area.

❏ To maintain the quality of the print head, this

printer stops printing before ink cartridges are

completely expended.

❏ Although the cartridges may contain recycled

materials, this does not affect functions or printer

performance.

❏ Do not dismantle or remodel cartridges. You may

not be able to print properly.

❏ Do not drop or knock cartridges against hard

objects. It may cause an ink leak.

Notes on Handling White Ink

A characteristic of White ink is that it sediments easily

(ink particles sink to the bottom of the liquid). If the ink

is used while in this state, print quality may decline or

the printer may malfunction. Note the following points

to use the printer under optimum conditions.

❏ Remove the installed cartridge at the start of every

working day or every 20 hours (when a message is

displayed), and shake it well.

U “Replacing and Shaking Cartridges” on

page 58

SC-F2000 Series User’s Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F2000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info