Bedienungsanleitung Epson SureColor SC-F2000 (Seite 83 von 104) (Englisch)

617671

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Are you using old ink cartridges?

The print quality declines if you use old ink cartridges.

Replace them with new ones. We recommend using

ink cartridges before the expiry date printed on the

package (within a year once it is installed in the

printer).

Have you shaken ink cartridges?

The ink cartridges for this printer contain pigment ink.

Shake the cartridges thoroughly before installing

them in the printer. To maintain optimum print

quality, we recommend removing and shaking the

installed White ink cartridge at the start of every

working day or every 20 hours (when a message is

displayed), and the other colors once a month.

U “Replacing and Shaking Cartridges” on page 58

Have you compared the printing result with

the image on the display monitor?

Since monitors and printers produce colors

differently, printed colors and colors on the screen do

not always look the same.

Did you open the printer cover while

printing?

If the printer cover is opened while printing, the print

head stops suddenly and this causes unevenness in

the color. Do not open the printer cover while

printing.

Is Ink Low displayed in the control panel?

The print quality may decline when the ink is low. We

recommend replacing the ink cartridge with a new

one. If there is a difference in color after replacing the

ink cartridge, try performing head cleaning a few

times.

Are you printing vivid colors?

Vivid colors may appear as lines depending on the

amount of ink fired and the unevenness of the T-shirt

surface. Set the [Print Quality] to [Quality] in the

printer's Garment Creator software.

Does the T-shirt you are printing on absorb

ink easily?

As it is difficult to force the ink to remain on the surface

of the T-shirt, misalignment appears as lines in Auto

(bi-directional) printing depending on the

unevenness of the T-shirt surface. If this occurs,

perform Head Alignment.

U “Correcting the print misalignment” on page 46

If the problem is not cleared even after performing

Head Alignment, change the print head movement to

uni-directional from the printer's Garment Creator

software or the control panel's menu. If lines are still

visible, set the [Print Quality] to [Quality].

Have you made the pre-treatment liquid too

weak?

If the pre-treatment liquid has been diluted too much,

the solidity of the White ink is weakened and the

edges of the image may be blurred. Try reducing the

density of the White ink in the software, or make the

pre-treatment liquid stronger.

Adjust the density of the White ink.

When printing on dark colored T-shirts, vertical

unevenness may occur depending on the base color.

If this occurs, try reducing the density of the White ink

used for the under-base. You can adjust the White ink

density in the printer's Garment Creator software.

Vertical ruled lines are misaligned.

Is the print head misaligned?

The print head normally prints bi-directionally. Lines

may appear misaligned due to the misalignment of

the print head in bi-directional printing. Try Head

Alignment when vertical lines are misaligned.

U “Correcting the print misalignment” on page 46

If ruled lines are still misaligned even after performing

Head Alignment, set Head Move Direction to

Uni-Directional from the printer's Garment Creator

software or the control panel's menu list.

U “Menu List” on page 70

The printed surface is soiled

Is the suction cap clean?

The printed surface may be soiled from dripping ink if

lumps of ink or lint are stuck around the suction cap.

Clean the suction cap.

U “Cleaning Caps” on page 51

SC-F2000 Series User’s Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F2000 Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info