Bedienungsanleitung Epson SureColor SC-F6000 (Seite 60 von 81) (Englisch)

617672

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Is the message Motor Self Adjustment

displayed on the control panel's screen?

The printer adjusts the internal motor. Wait for a while

without turning off the printer.

The nozzle check pattern is not

printed correctly.

Perform head cleaning.

The nozzles may be clogged. Print a nozzle check

pattern again after performing head cleaning.

U “Cleaning the print head” on page 46

Has the printer been left unused for a long

time?

If the printer has not been used for a long time, the

nozzles may have dried up and have been clogged.

The prints are not what you

expected

Print quality is poor, uneven, too

light, or too dark.

Are the print head nozzles clogged?

If the nozzles are clogged, specific nozzles do not fire

ink and the print quality declines. Print a nozzle check

pattern.

U “Checking for clogged nozzles” on page 45

Was Head Alignment performed?

With bidirectional printing, the print head prints while

moving left and right. If the print head is misaligned,

ruled lines may be misaligned accordingly. If vertical

ruled lines are misaligned with bidirectional printing,

perform Head Alignment.

U “Minimizing Print Misalignments (Head

Alignment)” on page 46

Are you using a genuine Epson ink pack?

This printer is designed for use with Epson ink packs.

The print quality may decline if any inks other than the

specified ink packs are used.

We recommend using the genuine ink packs specified

in this manual.

Are you using an old ink pack?

The print quality declines when an old ink pack is used.

Always use new ink packs. Use the ink before the

recommended usage date on the ink pack.

Are the paper type settings correct?

Print quality may be adversely affected if the software

RIP settings or Select Paper Type setting on the

printer does not match that of the paper actually used

for printing. Be sure to match the paper type setting

with the paper that is loaded in the printer.

Have you compared the printing result with

the image on the display monitor?

Since monitors and printers produce colors

differently, printed colors will not always match

on-screen colors perfectly.

Did you open the printer cover while

printing?

If the printer cover is opened while printing, the print

head stops suddenly causing unevenness in the color.

Do not open the printer cover while printing.

The print is not positioned properly

on the paper.

Have you specified the print area?

Check the print area in the settings of the application

and the printer.

Is the paper skewed?

If Off is selected for Paper Skew Check in the Setup

menu, printing will continue even if the paper is

skewed, resulting in data being printed off the paper.

Select On for Paper Skew Check in the Setup menu.

U “Setup menu” on page 40

Does the print data fit within the paper

width?

Although under normal circumstances printing stops

if the print image is wider than the paper, the printer

may print outside the bounds of the paper when Off is

selected for Paper Size Check in the Setup menu.

Select On for Paper Size Check in the Setup menu.

U “Setup menu” on page 40

SC-F6000 Series User’s Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F6000 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info