Bedienungsanleitung Epson SureColor SC-F6000 (Seite 61 von 81) (Englisch)

617672

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

Is the roll paper margin set to 15 mm or 35

mm?

If the value selected for Roll Paper Margin in the

Setup menu is wider than the margins selected in the

application, priority will be given to the value selected

for Roll Paper Margin. For example, if 15 mm is

selected for the left and right margins in the printer

menus and the document fills the page, the 15 mm at

the left and right sides of the page will not be printed.

U “Printable area” on page 30

Vertical ruled lines are misaligned.

Is the print head misaligned? (in bidirectional

printing)

With bidirectional printing, the print head prints while

moving left and right. If the print head is misaligned,

ruled lines may be misaligned accordingly. If vertical

ruled lines are misaligned with bidirectional printing,

perform Head Alignment.

U “Minimizing Print Misalignments (Head

Alignment)” on page 46

The printed surface is scuffed or

soiled.

Is the paper too thick or too thin?

Check that the paper specifications are compatible

with this printer. For information about the paper

types and appropriate settings for printing when

using RIP software, contact the manufacturer of the

RIP.

Is the paper creased or folded?

Do not use old paper or paper with folds in it. Always

use new paper.

Is the print head scuffing the printed surface?

If the surface of the paper is scuffed, select a Platen

Gap option between Wide and Wider in the Paper

menu.

U “Paper menu” on page 37

Is the print head scuffing the edge of the

paper?

Select Top35mm/Bottom15mm for the Roll Paper

Margin option in the Setup menu.

U “Setup menu” on page 40

Widen the bottom margin

Depending on the content of the print data, the

bottom edge may be scuffed when printing. In this

situation it is best to create your data with a bottom

margin of 150 mm.

Does the interior of the printer need

cleaning?

The rollers may need cleaning. Clean the rollers by

feeding and ejecting paper.

U “Cleaning the inside” on page 55

The reverse side of the printed paper

is soiled.

Select On for Paper Size Check in the menus.

Although printing normally stops if the print image is

wider than the paper, when Off is selected for Paper

Size Check in the Setup menu, the printer may print

outside the bounds of the paper, getting ink on the

inside of the printer in the process. This can be

prevented by selecting On for Paper Size Check in

the Setup menu.

U “Setup menu” on page 40

Is ink dry on the printed surface?

Depending on the printing density and media type,

the ink may take a while to dry. Do not stack the paper

until the printed surface is dry.

U “Cleaning the inside” on page 55

Feeding or ejecting problems

Unable to feed or eject paper.

Is the paper loaded in the correct position?

See the following for the correct paper loading

positions.

U “Loading Roll Paper” on page 21

If the paper is loaded correctly, check the condition of

the paper that you are using.

Is the paper creased or folded?

Do not use old paper or paper with folds in it. Always

use new paper.

SC-F6000 Series User’s Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F6000 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info