Bedienungsanleitung Epson SureColor SC-S40600 (Seite 17 von 124) (Englisch)

617689

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

❏ When using the printer, observe the operating

temperature and humidity range described in the

"Specifications Table". U “Specifications Table”

on page 110

Note, however, that the desired results may not be

achieved if the temperature and humidity are

within the limits for the printer but not within those

for the media. Be sure the operating conditions suit

the media. For more information, see the

documentation supplied with the media.

Also, when operating in dry areas, air conditioned

environment, or under direct sunlight, maintain

the appropriate humidity.

❏ Avoid using the printer in locations with heat

sources or that are exposed to direct draughts from

ventilators or air conditioners. The print head

nozzles could dry out and clog.

❏ Do not bend or tug the waste ink tube. Ink could

spill inside or around the printer.

❏ Maintenance such as cleaning and replacement

must be performed according to usage frequency or

at recommended intervals. Failure to perform

regular maintenance could result in loss of print

quality. In the absence of the appropriate

maintenance, continued use could damage the

print head.

U “Cleaning Locations and Cleaning Timing” on

page 51

❏ The print head may not be capped (the print head

may not return to the right side) if the printer is

turned off when the media is jammed or an error

has occurred. Capping is a function for

automatically covering the print head with a cap

(lid) to prevent the print head from drying out. In

this case, turn on the power and wait a while until

capping is performed automatically.

❏ When the power is on, do not remove the power

plug or cut the power at the breaker. The print head

may not be capped properly. In this case, turn on the

power and wait a while until capping is performed

automatically.

❏ The print head is automatically cleaned at a fixed

interval after printing to keep the nozzle from

clogging.

Be sure that the Waste Ink Bottle is placed whenever

the printer is on.

❏ As well as being expended during printing, ink is

used during head cleaning and other maintenance

required to keep the print head in working order.

Notes when not using the printer

If you are not using it, note the following points when

storing the printer. If it is not stored correctly, you may

not be able to print properly the next time it is used.

❏ If the printer will not be used for an extended period

(and switched off), use Cleaning Cartridge

(available separately) and perform Pre-Storage

Maint. Leaving the heads unwashed causes

permanent clogs.

See the following for more information.

U “Long-term Storage (Pre-storage

Maintenance)” on page 74

❏ If you do not print for a long time and do not

perform pre-storage maintenance, turn the printer

on at least once every seven days.

If you do not print for a long time, the print head

nozzles may become clogged. Head cleaning will be

performed automatically after the printer is turned

on and started. Head cleaning prevents clogged

print heads and maintains print quality. Do not

turn the printer off until cleaning is complete.

❏ If you have not used the printer for a long time,

check the print head for clogging before you start

printing. Perform head cleaning if the print head is

clogged.

U “Printing nozzle check patterns” on page 72

❏ The pressure rollers may crease media left in the

printer. The media may also become wavy or

curled, causing jams or resulting in the media

coming into contact with the print head. Remove

the media before putting the printer in storage.

❏ Store the printer after confirming that the print

head has been capped (the print head is positioned

at the far right). If the print head is left uncapped for

a long time, the print quality may decline.

Note:

If the print head is not capped, turn the printer on, and

then turn it off.

SC-S60600 Series/SC-S40600 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S40600 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S40600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info