Bedienungsanleitung Epson SureColor SC-S40600 (Seite 18 von 124) (Englisch)

617689

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

❏ Close all covers before placing the printer in

storage. If you are not using the printer for a long

time, put an anti-static cloth or cover on the printer

to prevent dust. The print head nozzles are very

small, and they can become clogged easily if fine

dust gets on the print head, and you may not be able

to print properly.

❏ When storing the printer, be sure that it is level: do

not store it on an angle, on end, or upside down.

Notes on handling ink cartridges

Note the following points when handling ink cartridges

to maintain good print quality.

❏ Extra ink is required to fully charge the print head

nozzles the first time the printer is used;

replacement cartridges will be needed earlier than

usual.

❏ Store ink cartridges at room temperature in a

location that is not exposed to direct sunlight.

❏ To ensure print quality, use all the ink in the

cartridge before the earlier of the following dates:

❏ The expiry date shown on the ink cartridge

packaging

❏ Six months after opening the package of ink

cartridge

❏ If you move ink cartridges from a cold place to a

warm place, leave it at room temperature for more

than four hours before using the ink cartridge.

❏ Do not touch the ink cartridge IC chip. You may not

be able to print properly.

❏ You cannot print if any of the ink cartridge slots are

empty.

❏ Do not leave the printer without ink cartridges

installed. The ink in the printer will dry out and the

printer will not function as expected. Leave ink

cartridges in all slots even when the printer is not in

use.

❏ Because the green IC chip contains the cartridge's

own information such as the remaining ink level,

you can still reinstall and use the ink cartridge after

removing it from the printer.

❏ Use a cleaning stick from the supplied Maintenance

Kit to wipe ink from the ink supply port of

cartridges that have been removed from the printer

before all the ink is used. Dried ink on the supply

port may cause ink leaks when the cartridge is

reinserted and used.

While cartridges are in storage, keep the ink supply

ports free of dust. The ink supply port has a valve in

it so it does not need to be capped.

❏ Removed ink cartridges may have ink around the

ink supply port, so be careful not to get any ink on

the surrounding area when removing the

cartridges.

❏ To maintain the quality of the print head, this

printer stops printing before ink cartridges are

completely expended.

❏ Although the ink cartridges may contain recycled

materials, this does not effect printer function or

performance.

❏ Do not dismantle or remodel ink cartridges. You

may not be able to print properly.

❏ Do not drop or knock it against hard objects;

otherwise, the ink may leak from the cartridge.

❏ Ink cartridges installed in the printer must be

removed and thoroughly shaken once every three

weeks.

Shaking ink cartridges U “Shaking” on

page 62

SC-S60600 Series/SC-S40600 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S40600 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S40600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info