Bedienungsanleitung Epson SureColor SC-S50600 (Seite 151 von 198) (Englisch)

617685

151

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Item Parameter Explanation

Light Off

After 1 to 240 hours

Select the timing and intensity level to periodically perform head

cleaning. Periodical cleaning will not be performed while Off is selected. If

a value between 1 and 240 hours is selected, head cleaning will be

performed after the specified number of hours. However, if the specified

time for cleaning is reached during printing, head cleaning is performed

after printing is completed.

The following reset the timer:

❏ When the specified time has been changed; or

❏ When All Nozzles has been performed over the level selected in this

setting.

Medium

Heavy

Power

Cleaning Cycle Off Choose the frequency with which the performs auto head cleaning: never

(Off) or once every 1 to 10 pages. Cleaning Cycle will not be performed

while Off is selected. Select 1 to 10 to perform head cleaning before the

specified number of pages is printed.

1 to 10 pages

Heat Off Timer 15 to 240 minutes You can turn off the heaters automatically when no errors are detected

and no print jobs are in progress. This option is used to choose the interval

before the heaters turn off automatically.

The printer will enter sleep mode when the Heat Off Timer expires. In sleep

mode, the control panel turns off and the internal motors and other

components consume less power. If an additional print drying system

(supplied with the SC-S50600 series; optional with other models) is

installed, it will turn off automatically.

To reactivate the control panel display, press any button in the control

panel except P. The control panel display will however turn off again if no

operations are performed for another 30 seconds under these conditions.

The printer and heaters are only fully reactivated when a print job is

received, the media loading lever is used, or another operation involving

printer hardware is performed.

Head Mode

2 Heads Mode

Use in 2 Heads Mode in most situations.

For example, if there is a clogged nozzle in a single print head and the clog

cannot be cleared after repeated head cleaning, you continue printing

using the unclogged print head. This feature is convenient because

printing can continue during work time, and Head Washing and other

maintenance can be done after work.

Check the check pattern printed in the Nozzle Check, and then select the

unclogged head.

Head1

Head2

Restore Settings Yes

Select Yes to restore all items in the Printer Setup menu to their default

settings.

The Maintenance Menu

The Maintenance menu can be accessed directly by pressing the # button.

Setting items and setting values marked with asterisks indicate the following printer models.

*1: SC-S70600 series and SC-S50600 series only supported *2: SC-S50600 series only supported *3: SC-S30600 series

only supported *4: SC-S70600 series only supported

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Using the Control Panel Menu

151

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S50600 Seite 151

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S50600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info