Bedienungsanleitung Epson SureColor SC-S50600 (Seite 150 von 198) (Englisch)

617685

150

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Item Parameter Explanation

Warning Options

Off

Choose whether the printer automatically detects (On) or does not

automatically detect (Off), the media rising during printing.

If On is selected, the printer will stop when the media rises to prevent a

head strike.

On is recommended if you will be performing other tasks and are unable

to give the printer your full attention during printing.

This may not be detected in the following instances even when On is

selected. Visually check that the media has not risen before you start

printing.

❏ Set Media Size Check to Off.

❏ Set Platen Gap to 2.5.

❏ When printing patterns for Auto Media Adjust, Media Adjust (Feed

Adjustment, Head Alignment), and Nozzle Check (auto/manual).

❏ When printing the job log, status sheets, and network settings.

When using transparent film or high-gloss media, media rise cannot be

detected even if this is set to On. If the media rubs against the print head

frequently, visually check the condition before you start printing.

Warning Level Options 1 to 5 The higher the value, the more sensitive the printer to media rise.

Choose lower values to reduce the number of stoppages.

Auto Nozzle Check

Nozzle Check Cycle

Off

Choose the frequency with which the printer performs an Auto Nozzle

Check: never (Off) or once every 1 to 10 pages. Auto Nozzle Check will

not be performed while Off is selected. If 1 to 10 is selected, the printer will

automatically checks for clogs at the specified intervals by scanning a test

pattern with a sensor as it is being printed.

Note that Auto Nozzle Check is not capable of detected all types of clog.

In addition, Auto Nozzle Check is not available depending on media

types or conditions.

U “Checking for clogged nozzles” on page 128

1 to 10 pages

Options When

Clogged

Continue Printing

Choose how the printer responds when Auto Nozzle Check detects

clogged nozzles.

If Continue Printing is selected, the printer will display Nozzle Clog

Detected but keep printing. Stop printing and perform head cleaning if

you judge it necessary on inspecting the print results.

U “Head Cleaning” on page 129

If Stop Printing is selected, the printer will display Nozzle Clog Detected

and pause printing. Inspect the print results and choose whether to

resume or suspend printing according to the extent of the clog.

Stop Printing

Print Nozzle Pattern

Off Choose the frequency with which the printer prints a nozzle test pattern:

never (Off) or once every 1 to 10 pages. Periodic test patterns will not be

printed while Off is selected. To print a test pattern at the top of every 1 to

10 pages, select an option between 1 and 10. When printing is complete,

you can visually inspect the pattern to determine whether there may be

faint or missing colors in the preceding or following printout.

1 to 10 pages

Periodical Cleaning

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Using the Control Panel Menu

150

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S50600 Seite 150

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S50600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info