Bedienungsanleitung Epson SureColor SC-S50600 (Seite 158 von 198) (Englisch)

617685

158

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

Messages What to do

Media Sensor Error

Loaded media or print out has a problem.

Refer to documentation for details.

Press the W button to clear the message from the display.

The auto menu of Auto Media Adjust, Auto Nozzle Check, and Media Adjust of

the media settings are not available in the following media setting or conditions.

❏ Transparent or colored media, or tracing paper is used.

❏ Platen Gap is set to 2.5 in the media settings.

❏ The printer is used in a place that is exposed to direct sunlight or interference

from other ambient light sources.

In these cases, execute the manual menu.

When executing Auto Media Adjust or Media Adjust: U “Media Adjust” on

page 86

When executing Auto Nozzle Check: U “Printing nozzle check patterns” on

page 128

If the printer is exposed to interference from ambient light sources, shade the

printer from these sources and perform the function again; it may succeed. When

the function has failed after shading the printer, execute the manual menu.

If this error is displayed when executing under conditions other than those listed

above, when executing Auto Media Adjust, or the auto menu of Media Adjust,

adjustment pattern printing may fail due to nozzle clogging. Perform head

cleaning, and execute them again.

U “Head Cleaning” on page 129

If this error is displayed under conditions other than those listed above, confirm

that the currently loaded media match usage conditions of the printer.

U “Supported Media” on page 176

Pressure Roller Error

Pressure rollers are positioned incorrectly.

Release media loading lever and

reposition rollers.

One of the following has occurred. Reposition the rollers as described in “Printable

Area”.

❏ None of the rollers is positioned inside the bounds of the black labels.

❏ Only one of the rollers is positioned inside the bounds of the black labels.

❏ The rollers at the edges of the media are not the same type.

(A high pressure roller is at one edge, a low pressure roller at the other.)

❏ On is selected for Media Size Check in the printer settings menu and a roller

is positioned in a black label that is not over the media.

❏ Two rollers are positioned inside the bounds of the same black label.

U “Printable area” on page 91

Ink Layering Error

Pressure rollers are positioned incorrectly.

Reposition rolllers.

You are using the low pressure rollers. Use the high pressure rollers for ink layering.

Roll Type Error

Release and then reset the media loading

lever, then match Roll Type setting to

actual media.

❏

Does the Ro

ll Type specified at media loading match the actual roll type?

Raise the media loading lever to resolve the error. Lower the media loading

lever again, and follow the on-screen instructions of the printer to correctly

specify the Roll Type.

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide

Problem Solver

158

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-S50600 Seite 158

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-S50600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info