675338
221
Zoom out
Zoom in
Vorherige Seite
1/254
Nächste Seite
& “Sending Faxes Dialing from the External Phone Device” on page 123
& “Managing Contacts” on page 44
& “Cannot Send or Receive Faxes” on page 219
Cannot Send Faxes at a
Specied
Time
Set the date and the time correctly on the control panel.
Related Information
& “Sending Faxes in Monochrome at a Specied Time (Send Fax Later)” on page 127
& “Basic Settings” on page 47
Cannot Receive Faxes
If you have subscribed to a call forwarding service, the printer may not be able to receive faxes. Contact the
service provider.
If you have not connected a telephone to the printer, set the Receive Mode setting to Auto on the control panel.
Under the following conditions, the printer runs out of memory and cannot receive faxes. See the
troubleshooting for information on handling a memory full error.
200 received documents have been saved in the inbox and the condential box in total.
e printer's memory is full (100%).
When receiving faxes using the subaddress feature, check that the subaddress and password are correct. Check
with the sender that the subaddress and password match.
Check if the sender's fax number has been registered to the Rejection Number List. Faxes sent from numbers
that have been added to this list are blocked when Rejection Number List in Rejection Fax is enabled.
Check if the sender's fax number is registered in the contact list. Faxes sent from numbers that have not been
registered to this list are blocked when Unregistered Contacts in Rejection Fax is enabled.
Ask the sender if header information is setup on their fax machine. Faxes that do not include header
information are blocked when Fax Header Blank in Rejection Fax is enabled.
Related Information
& “Cannot Send or Receive Faxes” on page 219
& “Memory Full Error Occurs” on page 222
& “Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD) (Polling Receive)” on page 133
Cannot Save Received Faxes to a Memory Device
Check if the memory device is connected to the printer, and then check the Receive Settings.
User's Guide
Solving Problems
221
221

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson WF-C8610 - Workforce Pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson WF-C8610 - Workforce Pro

Epson WF-C8610 - Workforce Pro Bedienungsanleitung - Deutsch - 267 seiten

Epson WF-C8610 - Workforce Pro Bedienungsanleitung - Holländisch - 261 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info