6.1 PREPARING HOT WATER
You can use the hot water function for prewarming cups, for preparing instant beverages
or tea.
Slide the moving tube on the swivelling nozzle al the way up.
Important: The swivelling nozzle becomes very hot. Be careful you don't burn yourself.
-- Switch on the appliance using the on/off button and flush if necessary. The
appliance is ready for use when the indicator illuminates.
-- Hold a container under the swivelling nozzle and initiate the preparation of hot water by
turning the selector dial anticlockwise to the stop and press the button.
-- You can stop the flow of hot water by turning the selector dial clockwise back to the
0-position.
PREPARING HOT WATER
GB 13
5.1 FROTHING MILK
Hot steam can be used both for frothing milk for cappuccino and for heating liquids.
For one cup of cappuccino: fill a large cup up to 2/3 full with espresso and then add the
frothed milk.
Frothing milk: Slide the moving tube on the swivelling nozzle all the way down.
Warming liquids: Slide the moving tube up.
-- Switch on the appliance using the on/off button and flush if necessary. The
appliance is ready for use when the indicator illuminates.
-- Immerse the swivelling nozzle in the container with the milk to be frothed or the liquid
to be heated and start the production of steam by turning the selection dial
anticlockwise to the stop.
Due to the nature of the system, a little water runs out of the swivelling nozzle first, this
can be run off first, however it will not affect the quality of the result, e.g., on frothing
milk. The indicator flashes.
Important: Only immerse the swivelling nozzle around half way into the liquid so that air
can be drawn in unhindered. The swivelling nozzle should not touch the base of the
container to avoid the hindrance of the outlet of steam.
Important: The swivelling nozzle becomes very hot. Be careful you don't burn yourself.
-- You can stop the outlet of steam by turning the selector dial clockwise to the 0-position.
In particular after frothing milk, it is recommended to briefly activate the outlet of steam to
"blow out the swivelling nozzle". Then clean the milk residues from the swivelling nozzle
using a damp cloth. Move the moving metal tube up and down during this process.
After steam has been drawn off, all 4 green indicators flash to indicate that the
system must be refilled with water. Proceed as follows:
-- Place a container under the swivelling nozzle.
-- Turn the selector dial anticlockwise to the stop.
-- Press the button. Wait until the flow of water stops automatically. All
4green indicators then flash.
-- Turn the selector dial anticlockwise back to the 0-position. The appliance is now
ready for use again.
FROTHING MILK
GB 12
