Bedienungsanleitung Eufy RoboVac G40 Hybrid (Seite 8 von 37) (Englisch, Französisch, Spanisch)

796805

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

12 EN EN 13

Auto-Cleaning Mode

After startup, RoboVac moves from the Charging Base and automatically

determines its cleaning route, following a Z-shaped cleaning path. When the

cleaning is ﬁnished, RoboVac automatically returns to the Charging Base.

Press to start cleaning in Auto-Cleaning mode.

Spot Cleaning Mode

RoboVac intensively cleans a speciﬁc area in a spiral pattern, which is useful

if there is a concentrated area of dust or debris. In Spot Cleaning mode,

RoboVac will stop cleaning after 2 minutes.

• Press on RoboVac to start cleaning in Spot Cleaning mode.

Select a Suction Power Level

In the eufy Clean app, select a suction power level according to your

needs: Quiet, Standard (Default), Turbo and Max.

• When RoboVac starts cleaning next time, it will clean according

to the suction power level you previously selected.

Use Mopping System

• The mopping mode is only intended for a clean floor without

stubborn stains. To avoid staining floors, do not use the mopping

function when dust is mixed with liquids such as coffee or ink.

• Mopping system cleans best on smooth hard surfaces and may

not perform so well on uneven tiles, heavily waxed floors or

rough surfaces like slate or brick, which may snag the mopping

module.

• The mopping mode is not recommended for use when no one is

at home.

• Do not use the mopping mode on a carpeted floor. It is

recommended to set a magnetic strip or physical barrier to avoid

cleaning the carpeted area.

Before mopping, make sure the waterproof pad has been installed

under the Charging Base.

Download the eufy Clean app from the App Store (iOS devices) or

Google Play (Android devices).

Open the app and create a user account.

Tap the “+” icon to add RoboVac to your eufy Clean account.

Follow the instructions in the app to set up the Wi-Fi connection.

After connecting successfully, you can control RoboVac via the app.

With the app, you can select a cleaning mode, set the time, schedule

a cleaning, adjust suction power, view system status, receive

notiﬁcations, and access additional features.

Slowly flashing blue Waiting for connection

Rapidly flashing blue

Connecting with your wireless router

Steady blue

Connected with your wireless router

• If RoboVac gets stuck in any space, tap Find My Robot in the

app to find the device.

Restore Factory Settings

Press and hold on RoboVac for 10 seconds to restore factory settings if

necessary.

You will hear a voice prompt when the settings have been reset and the

Wi-Fi status light will slowly ﬂash blue.

Start / Pause Cleaning

• Make sure the main power switch at the side of RoboVac is

turned on before use.

• You can also start or pause cleaning via the eufy Clean app.

Press on RoboVac to start cleaning in Auto-Cleaning mode.

To pause cleaning, press again.

Select a Cleaning Mode

• You can also select the cleaning mode via the eufy Clean app.

• By default, RoboVac starts in Auto-Cleaning mode when it is

turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eufy RoboVac G40 Hybrid Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info