Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
1. Scan the QR code (Figure 6) to open the
video. This video demonstrates the
installation of this device.
2. Place the indoor unit (Figure 7, pos. 1) loose
on top of the outdoor unit (Figure 7, pos. 5).
3. Remove the four screw caps
(Figure 7, pos. 4).
4. Attach both bottom caravan brackets
(Figure 7, pos. 2) to the outdoor unit by
tightening two screws per bracket
(Figure 7, pos. 4).
5. Make sure to screw the adjustment bolts
(Figure 7, pos. 3) as far out as possible.
6. Attach the distance holders (Figure 7, pos. 6)
to the outdoor unit (Figure 7, pos. 5).
