7. Attach the top caravan brackets
(Figure 8, pos. 3) to the indoor unit
(Figure 8, pos. 1) by using the rubber hooks
(Figure 8, pos. 2).
8. Open the caravan window as far as possible.
9. Place the complete unit in the window using
the side handles of the outdoor unit
(Figure 9, pos. 2).
Make sure the gray blocks (Figure 9, pos. 3)
are in the window seal.
10. Tighten the bolts (Figure 9, pos. 1) hand tight
on the caravan.
11. Make sure you have the screw caps
(Figure 2, pos. 8) within reach for the threads
on the bracket (Figure 9, pos. 4).
12. Lift the indoor unit through the window and
place the hooks (Figure 10, pos. 1) on the
threaded end (Figure 10, pos. 2).
13. Tighten the screw caps (Figure 2, pos. 8) on
the threads (Figure 10, pos. 2).
14. Make sure the outdoor unit is level by
adjusting the distance screws spacer
(Figure 7, pos. 6).
15. The refrigerant hose (Figure 10, pos. 3) is
guided between the indoor- and outdoor
unit. Avoid bending the refrigerant hose in
smaller bends than 30 mm.
16. Close and lock the caravan window in the
ventilation position.
