Bedienungsanleitung Eurom BK2003 (Seite 12 von 20) (Deutsch, Englisch, Holländisch, Französisch)

474865

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

20. Close supervision is necessary when the product is used near children or incapacitated persons. Do not let

children use the appliance as a toy. This appliance is not suitable to be operated by children or persons who

have physical, sensory and/or mental limitations, or by persons who have no knowledge of, or experience

with, this appliance.

21. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of

overheating. Make sure these deposits are removed regularly.

22. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is

malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to

the vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.

23. Do not use attachments and/or accessories, not recommended or supplied by the manufacturer.

24. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified

persons.

25. Only use this heater for its intended purpose and as described in this instruction manual.

Not abiding by instructions 23, 24 and 25 may lead to damage, fire and/or personal injuries. A failure to adhere to

these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take

responsibility for any of the consequences!

Description

1 – Thermostat dial

2 – On/off dial and control dial

3 - Attachment bracket

4 – Pilot light

5 – Air intake grill (back side)

6 – Air outlet grill

7 – Spacer bracket

Location and Connection

Remove all packaging material and keep out of reach of children. After removing packaging, check the appliance

for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the

appliance, but contact your vendor for inspection or replacement.

The BK2003 can be used standing or hanging.

Standing

 Choose a suitable location for the heater which is at least one metre away from any obstructions, walls or

inflammable materials (see also safety instructions).

Make sure a functioning heater is always placed on a solid, flat and horizontal surface. Never place it on a bed,

cushion, deep-pile carpet or similar!

Hanging

 Choose a suitable place for the heater, taking into account the safety regulations. The wall on which the

device is to be hung must be sturdy, non-flammable, smooth and fully vertical.

 Drill 2 holes in the wall at the chosen location with an 8 mm drill bit: make sure these holes are horizontal

and 49 mm apart. (B) Place the plugs in the holes and screw the attachment bracket to the wall with the two

large screws.

 Push the two pins on the spacer bracket in the holes on the back of the heater (D) as far as they will go.

 Slide the heater, with the back over the attachment bracket, so that the screw holes are lined up (E). Screw

the heater to the bracket with the two small screws that are supplied (F). Make sure that the heater is firmly

secured to the wall.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom BK2003 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info