Bedienungsanleitung Eurom EK12000prof (Seite 10 von 28) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

510009

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

16. Never leave the heater unattended when switched on. Always switch if off before removing the plug from the

socket. Always unplug the heater when not in use! Pull on the plug to remove from the socket, never pull on

the cord.

17. Always switch the heater off, unplug it and leave to cool down before:

- cleaning the heater

- carrying out maintenance to the heater

- touching or moving the heater. Use the handle for this!

18. This machine gets hot when it is in use. To prevent burns, do not let bare skin come into contact with hot

surfaces.

19. Do not use a timer or a similar product to automatically switch on the heater. Always perform safety checks

before using the heater!

20. Exercise due caution when the heater is used in a room where there are children, people with a disability or

elderly people. Never leave these people alone in a room whilst the heater is on!

21. The device is not suitable for use by persons (including children) with a physical, sensual or mental limitation

or a lack of experience and knowledge, irrespective of whether they are being supervised or have been

issued with instructions in relation to the use of the device by a person who is responsible for their safety.

Always ensure that children cannot play with the device.

22. Keep the heater clean. Dust, dirt and/or a build up of deposits in the heater are a common cause of

overheating. Make sure these deposits are removed regularly.

23. Do not turn on the appliance if you have discovered damage to the appliance, cord or plug, if the appliance is

malfunctioning, if it has been dropped or if there are signs of any other defect. Return the complete product to

the vendor or to a certified electrician for inspection and/or repair. Always ask for original parts.

24. Do not use attachments and/or accessories that have not been recommended or supplied by the

manufacturer.

25. The appliance (incl. cord and plug) may only be opened and/or repaired by properly authorised and qualified

persons.

26. Only use this heater for its intended purpose and as described in this instruction manual.

Not abiding by instructions 24, 25 and 26 may lead to damage, fire and/or personal injuries. A failure to adhere to

these rules also immediately nullifies the guarantee and vendor, importer and/or manufacturer do not take

responsibility for any of the consequences!

Description

EUROM EKprof heaters are ‘real space’ heaters, with a powerful fan which disseminates a great deal of air.

Cold air is sucked in at the back, heated, and then blown out as hot air. Because a relatively large quantity of air

is sucked in and blown out, the air expelled by the heater does not feel particularly hot. As a great deal of air is

heated and blown out, however, the entire space (not just the air around the heater!) is gradually warmed up.

Location and Connection

 Remove all packaging material and keep out of reach of children. After removing packaging, check the

appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not

use the appliance, but contact your vendor for inspection or replacement.

 Choose a suitable location for the heater, i.e. at least 2 metre away from any obstructions, walls or

inflammable materials (see also safety instructions). Always ensure that the heater has sufficient space at the

back to suck in air and at the front, to blow out hot air (3 metre).

 Make sure the heater is always in an upright position on a solid, flat, horizontal and non-flammable surface.

Set-up and Operation

 Make sure the heater is turned off (switch to O position). Now plug into an earthed, correctly functioning

230V / 50Hz (EK3000prof) – 400V / 50Hz (EK12000prof) socket. Only connect the heater to an earthed

socket!

 Turn the mode selector dial to the desired position:

EK3000prof: 0 = off

1 = fan only

2 = 1,5 kW

3 = 3 kW

EK12000prof: 0 = off

1 = fan only

2 = 6 kW

3 = 9 kW

4 = 12 kW

The heater will now start working.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom EK12000prof Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info