Bedienungsanleitung Eurom EK12000prof (Seite 11 von 28) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

510009

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

If you wish to turn it off, set the switch to 0. Please refrain from immediately removing the plug from the socket:

the fan will continue to run for a while in order to cool the heater down. Once it has come to a standstill, the plug

can be removed from the socket.

Safety features

In case of internal overheating, the overheating safeguard will switch the heater off. If this occurs, immediately

turn the switch to O, unplug and allow heater to cool down for at least 10 minutes. In theory, the heater can now

be used as normal. There is, however, generally a reason for an appliance overheating. This may be because the

heater cannot adequately release its heat or take in fresh air (because the heater is covered, the grills are

blocked, the heater is placed too near a wall etcetera). Before using the heater again, therefore, remove or adjust

whatever caused the appliance to overheat. If you cannot find the cause and overheating recurs, stop using the

heater and contact your vendor or a certified electrician for inspection/repair. Overheating poses a serious fire

risk!

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these

should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool

down before cleaning or carrying out maintenance work..

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,

sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

 Use a vacuum cleaner or compressor to carefully remove any dust and dirt from the grills and ensure that

the air intake and outlet openings are clean. Be careful not to touch or damage any internal parts during

cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if possible. Store upright in a

cool, dry and dust-free place.

 Do not dispose of the heater with household waste when it becomes worn or damaged beyond repair. Take

it to your local authority's collection point for electrical appliances where any reusable materials will be

collected and redistributed.

CE-statement

Euromac bv., Genemuiden-NL hereby declares that the EUROM workspace heaters, type EK3000prof and

EK12000prof, comply with the LVD guideline 2006/95/EC and the EMC guideline 2004/108/EEC and meet the

following standards:

EN 60335-1:2002+A11,A1 :04+A12,A2 :06+A13 :08 EN 55014-1:2006/+A1 :2009/A2 :2011

+A14 :10+A15 :11 EN 55014-2:1997/+A1 :2001/+A2 :2008

EN 60335-2-30:2009 EN 61000-3-2:2006/+A1 :2009/+A2 :2009

EN 62233 :2008 EN 61000-3-3 :2008

Genemuiden, 24-10-2012

W.J. Bakker, alg. dir.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom EK12000prof Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info